Select PowerMax 2500 and 8500 Power Supplies and Options, Dell and Third-Party Racking POWERMAX-INSTALL Practice Questions (Page 5)

Questions 21–25

1. 21foundation · easy

   When configuring power supplies in a PowerMax system, what is a key guideline?

   • ADisable power supply monitoring to reduce overhead
   • BUse power supplies of different wattages
   • CConnect each power supply to a separate power source or circuit
   • DConnect all power supplies to the same power source
   Reveal Solution Discussion Select an answer first
2. 22application · medium

   A technician is racking a PowerMax 2500 into a third-party rack. The system has been lifted into position and is ready to be mounted. What is the correct next step in the rack installation procedure?

   • APower on the system before securing it to the rack
   • BConnect all data cables before securing the system
   • CRemove the mounting kit and place the system on a shelf
   • DSecure the system to the rack using the mounting kit and verify it is firmly attached
   Reveal Solution Discussion Select an answer first
4. 23foundation · easy

   Which of the following power supply options is available for the PowerMax 2500 storage system?

   • A–48 V DC, 1600 W power supplies
   • B240 V DC, 2000 W power supplies
   • C200–240 V AC, 1600 W power supplies
   • D100–240 V AC, 1600 W power supplies
   Reveal Solution Discussion Select an answer first
5. 24foundation · easy

   Which power supply options are available for the PowerMax 8500?

   • AAC power supplies only, rated at 100–240 V
   • BBoth AC and DC power supplies
   • CAC power supplies rated at 200–240 V only
   • DDC power supplies only, rated at –48 V
   Reveal Solution Discussion Select an answer first
6. 25application · medium

   Two technicians are preparing to rack a fully populated PowerMax 8500 into a Dell rack. The system weighs approximately 450 kg. The technicians are reviewing the installation procedure. What is the correct approach for lifting and mounting the system?

   • ARemove all components from the system to reduce weight before lifting
   • BUse a mechanical lift and follow the two-person lift procedure specified in the installation guide
   • CUse a pallet jack to slide the system directly into the rack
   • DHave the two technicians lift the system manually without a lift
   Reveal Solution Discussion Select an answer first