A customer is ordering a PowerMax 2500 for a facility that has two independent AC feeds. The customer wants to ensure the system remains operational if one feed fails. The system will be configured with the maximum number of power supplies supported. How should the power supplies be connected to the feeds?

Connect all power supplies to feed A and use feed B as a spare

Connect half of the power supplies to feed A and half to feed B

Connect all power supplies to feed B and leave feed A unused

Connect one power supply to feed A and the rest to feed B

What is a key requirement for installing a PowerMax system in a third-party rack?

The rack must be at least 42U in height

The rack must have a specific color

The rack must be from the same manufacturer as the system

The rack must meet the specified depth and mounting hole requirements

What is the first step when replacing a power supply in a PowerMax system?

Slide the power supply out of the enclosure

Press the release latch on the power supply

Remove the power cable from the power supply

What should be verified before installing a PowerMax system in a third-party rack?

The rack's weight capacity and stability

A PowerMax 8500 is being installed in a facility that provides DC power. The system will be configured with the maximum number of power supplies. What type of power supply should be ordered for this installation?

AC power supplies with a DC-to-AC converter

DC power supplies rated for the facility's DC voltage

Universal power supplies that accept both AC and DC

AC power supplies and a separate DC power distribution unit

Dell PowerMax Install

Domain 3Objective 5

Select PowerMax 2500 and 8500 Power Supplies and Options, Dell and Third-Party Racking POWERMAX-INSTALL Practice Questions (Page 1)

Part of the PowerMaxOS 10 Install domain, which accounts for 46% of the POWERMAX-INSTALL exam.

25questions here

5free pages

7concepts

46%of the exam

Questions 1–5

1expert · hard
A customer is ordering a PowerMax 2500 for a facility that has two independent AC feeds. The customer wants to ensure the system remains operational if one feed fails. The system will be configured with the maximum number of power supplies supported. How should the power supplies be connected to the feeds?
Select an answer first
2foundation · easy
What is a key requirement for installing a PowerMax system in a third-party rack?
Select an answer first
3foundation · easy
What is the first step when replacing a power supply in a PowerMax system?
Select an answer first
4foundation · easy
What should be verified before installing a PowerMax system in a third-party rack?
Select an answer first
5application · medium
A PowerMax 8500 is being installed in a facility that provides DC power. The system will be configured with the maximum number of power supplies. What type of power supply should be ordered for this installation?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERMAX-INSTALL

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERMAX-INSTALL” is a trademark of its owner, used for identification only.