A PowerMax 2500 has a power supply that has failed. The system is running with the remaining power supplies and is still operational. The administrator is about to replace the failed unit. What is the correct first step in the replacement procedure?

Disconnect all power cables from the system before replacing the unit

Power down the entire system before removing the failed power supply

Verify the replacement power supply is the correct part number and that the system is in a redundant state

Remove the failed power supply immediately without checking the system state

An organization is installing a PowerMax 8500 in a facility that has two independent power feeds. The storage administrator wants to ensure the system remains operational if one feed fails. The system will be configured with the maximum number of power supplies supported. How should the power supplies be connected to the feeds?

Connect all power supplies to feed B and leave feed A unused

Connect half of the power supplies to feed A and half to feed B

Connect all power supplies to feed A and use feed B as a spare

Connect one power supply to feed A and the rest to feed B

A PowerMax 8500 has one power supply faulted, and the system is running with the remaining supplies. The administrator is about to replace the failed unit. The system is currently in a non-redundant state because another power supply is also faulted. What should the administrator do first?

Replace the first faulted power supply, then replace the second faulted power supply

Power down the system before replacing any power supplies

Wait for the system to return to a redundant state before replacing any power supplies

Replace both faulted power supplies simultaneously

Dell PowerMax Install

Domain 3Objective 5

Select PowerMax 2500 and 8500 Power Supplies and Options, Dell and Third-Party Racking POWERMAX-INSTALL Practice Questions (Page 3)

Part of the PowerMaxOS 10 Install domain, which accounts for 46% of the POWERMAX-INSTALL exam.

25questions here

5free pages

7concepts

46%of the exam

Questions 11–15

11application · medium
A PowerMax 2500 has a power supply that has failed. The system is running with the remaining power supplies and is still operational. The administrator is about to replace the failed unit. What is the correct first step in the replacement procedure?
Select an answer first
12application · medium
An organization is installing a PowerMax 8500 in a facility that has two independent power feeds. The storage administrator wants to ensure the system remains operational if one feed fails. The system will be configured with the maximum number of power supplies supported. How should the power supplies be connected to the feeds?
Select an answer first
13foundation · easy
What is the wattage rating of the PowerMax 8500 power supplies?
Select an answer first
14foundation · easy
Which Dell rack is compatible with the PowerMax 2500?
Select an answer first
15expert · hard
A PowerMax 8500 has one power supply faulted, and the system is running with the remaining supplies. The administrator is about to replace the failed unit. The system is currently in a non-redundant state because another power supply is also faulted. What should the administrator do first?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERMAX-INSTALL

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERMAX-INSTALL” is a trademark of its owner, used for identification only.

Select PowerMax 2500 and 8500 Power Supplies and Options, Dell and Third-Party Racking POWERMAX-INSTALL Practice Questions (Page 3)

Questions 11–15

A PowerMax 2500 has a power supply that has failed. The system is running with the remaining power supplies and is still operational. The administrator is about to replace the failed unit. What is the correct first step in the replacement procedure?

What is the wattage rating of the PowerMax 8500 power supplies?

Which Dell rack is compatible with the PowerMax 2500?

A PowerMax 8500 has one power supply faulted, and the system is running with the remaining supplies. The administrator is about to replace the failed unit. The system is currently in a non-redundant state because another power supply is also faulted. What should the administrator do first?

Keep studying — PowerMaxOS 10 Install