Select PowerMax 2500 and 8500 Power Supplies and Options, Dell and Third-Party Racking POWERMAX-INSTALL Practice Questions (Page 4)

Questions 16–20

1. 16application · medium

   A data center is deploying a PowerMax 2500 and a PowerMax 8500 in the same row. The facility provides 208V AC power to both racks. The PowerMax 2500 will be configured with dual power supplies, and the PowerMax 8500 will be configured with dual power supplies. During the pre-installation survey, the facilities team asks which power supply variant should be ordered for each system to match the available voltage. What should you specify?

   • AHigh-line AC (200–240V) power supplies for both the PowerMax 2500 and the PowerMax 8500
   • BHigh-line AC for the PowerMax 2500 and low-line AC for the PowerMax 8500
   • CLow-line AC (100–120V) power supplies for the PowerMax 2500 and high-line AC for the PowerMax 8500
   • DDC power supplies for the PowerMax 2500 and high-line AC for the PowerMax 8500
   Reveal Solution Discussion Select an answer first
2. 17application · medium

   A company wants to install a PowerMax 2500 in an existing third-party rack that is 800 mm deep. The rack meets the required width and weight capacity. The installation team is reviewing the requirements. What is the primary consideration for this installation?

   • AVerify the rack depth is sufficient and that the Dell mounting kit is compatible with the rack's mounting holes
   • BConfirm the rack is from the same manufacturer as the PowerMax system
   • CCheck that the rack has a built-in power distribution unit
   • DEnsure the rack has a glass front door for visibility
   Reveal Solution Discussion Select an answer first
4. 18foundation · easy

   What should you do after installing a new power supply in a PowerMax system?

   • AImmediately remove the old power supply
   • BVerify that the power supply LED is green
   • CUpdate the firmware on the power supply
   • DDisconnect the power cable
   Reveal Solution Discussion Select an answer first
5. 19expert · hard

   A customer wants to install a PowerMax 8500 in a third-party rack that is 800 mm deep. The rack has a weight capacity of 600 kg and standard square mounting holes. The installation team is evaluating the compatibility. What is the primary concern?

   • AThe rack depth is insufficient for the PowerMax 8500
   • BThe rack's weight capacity is insufficient
   • CThe rack's mounting holes are incompatible
   • DThe rack is not from Dell
   Reveal Solution Discussion Select an answer first
6. 20foundation · easy

   What is the purpose of the rack mounting kit for PowerMax systems?

   • ATo provide additional cooling to the system
   • BTo connect the system to the network
   • CTo supply power to the system
   • DTo secure the system in the rack and provide proper alignment
   Reveal Solution Discussion Select an answer first