After physically installing the replacement Catalyst switch and connecting cables, what should the technician do to restore the previous configuration?

Manually reconfigure every interface from scratch

Reload the switch to factory defaults

Copy the saved configuration file to the running configuration

When replacing a Cisco 8000 Series router, what must be handled carefully during the hardware swap?

The number of power outlets in the rack

Line cards and their seating in the chassis

A UCS chassis with multiple blades failed. The technician has the RMA chassis. The UCS domain has two fabric interconnects. What is the correct procedure to replace the chassis?

Power down the fabric interconnects before installing the new chassis.

Install the new chassis, and it will automatically be discovered and configured by the fabric interconnects.

Back up the chassis configuration, install the new chassis, and restore the configuration.

Manually configure the new chassis in UCS Manager before installing it.

Before replacing a UCS E-Series server, what should be backed up to preserve its configuration?

The server's configuration and any associated UCS Manager settings

When replacing a Cisco ASR router, why is hardware compatibility important?

The replacement must have more memory than the original

The replacement must be a different model to avoid conflicts

The replacement must have a different power supply type

The replacement chassis must support the same line cards and modules

CiscoCertified Field Technician (CCT)

Domain 5Objective 2

5.2 Describe the Process for Replacing Cisco Devices 800-150 Practice Questions (Page 8)

Part of the 5.0 Cisco Hardware Replacement domain, which accounts for 35% of the 800-150 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~18–28 in this domain), expect 5–7 from this objective — we provide 40 practice questions to prepare you well beyond it. (estimate)

40questions here

8free pages

14concepts

35%of the exam

14 Concepts in This Objective

Catalyst Switch Replacement
Catalyst Edge Platform Replacement
Meraki Switch Replacement
ISR Router Replacement
ASR Router Replacement
Cisco 8000 Series Replacement
NCS Series Replacement
Secure Firewall Replacement
Nexus Switch Replacement
MDS Switch Replacement
UCS Infrastructure Component Replacement
UCS B/C/X-Series Replacement
UCS E-Series Replacement
Collaboration Device Replacement

Questions 36–40

36foundation · easy
After physically installing the replacement Catalyst switch and connecting cables, what should the technician do to restore the previous configuration?
Select an answer first
37foundation · easy
When replacing a Cisco 8000 Series router, what must be handled carefully during the hardware swap?
Select an answer first
38expert · hard
A UCS chassis with multiple blades failed. The technician has the RMA chassis. The UCS domain has two fabric interconnects. What is the correct procedure to replace the chassis?
Select an answer first
39foundation · easy
Before replacing a UCS E-Series server, what should be backed up to preserve its configuration?
Select an answer first
40foundation · easy
When replacing a Cisco ASR router, why is hardware compatibility important?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to 800-150

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “800-150” is a trademark of its owner, used for identification only.