What is a key characteristic of a UCS E-Series server that affects its replacement procedure?

It is an integrated server module that fits into a Cisco ISR router

It is a blade server that fits into a UCS chassis

After physically swapping a Nexus switch, what is the final step to restore service?

Restore the NX-OS configuration from the backup

Replace the power supply with a higher wattage unit

Update the switch's serial number in the inventory

Power cycle the switch multiple times

A branch office has a Catalyst 2960-X switch that failed. The replacement unit is already on-site. The technician has console access to the replacement, and the original configuration was backed up to a TFTP server. What is the correct sequence of steps to restore service?

Physically install the replacement, boot it, and manually reconfigure all settings from scratch since the backup is from a different model.

Power down the failed switch, physically install the replacement, boot it, copy the backup config from TFTP to startup-config, then reload.

Copy the backup config to the replacement's running-config, then power down the failed switch and swap the hardware.

Boot the replacement, copy the backup config to startup-config, then power down the failed switch and swap hardware.

After removing a Meraki switch from the network, what must the technician do to adopt a replacement switch?

Load the old switch's IOS image from a TFTP server

Copy the old switch's configuration via console cable

Add the replacement switch's serial number to the dashboard and claim it

Configure the replacement switch using the CLI

CiscoCertified Field Technician (CCT)

Domain 5Objective 2

5.2 Describe the Process for Replacing Cisco Devices 800-150 Practice Questions (Page 7)

Part of the 5.0 Cisco Hardware Replacement domain, which accounts for 35% of the 800-150 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~18–28 in this domain), expect 5–7 from this objective — we provide 40 practice questions to prepare you well beyond it. (estimate)

40questions here

8free pages

14concepts

35%of the exam

14 Concepts in This Objective

Catalyst Switch Replacement
Catalyst Edge Platform Replacement
Meraki Switch Replacement
ISR Router Replacement
ASR Router Replacement
Cisco 8000 Series Replacement
NCS Series Replacement
Secure Firewall Replacement
Nexus Switch Replacement
MDS Switch Replacement
UCS Infrastructure Component Replacement
UCS B/C/X-Series Replacement
UCS E-Series Replacement
Collaboration Device Replacement

Questions 31–35

31foundation · easy
What is a key characteristic of a UCS E-Series server that affects its replacement procedure?
Select an answer first
32foundation · easy
What type of configuration is used on Cisco 8000 Series routers that must be backed up before replacement?
Select an answer first
33foundation · easy
After physically swapping a Nexus switch, what is the final step to restore service?
Select an answer first
34application · medium
A branch office has a Catalyst 2960-X switch that failed. The replacement unit is already on-site. The technician has console access to the replacement, and the original configuration was backed up to a TFTP server. What is the correct sequence of steps to restore service?
Select an answer first
35foundation · easy
After removing a Meraki switch from the network, what must the technician do to adopt a replacement switch?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 800-150

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “800-150” is a trademark of its owner, used for identification only.