When replacing a Cisco Secure Firewall, what must be backed up to preserve security policies?

The configuration and access control policies

What must be considered when physically swapping an MDS switch to avoid disrupting the SAN?

Properly labeling and reconnecting fiber optic cables

Updating the firmware of connected servers

When replacing a Cisco Catalyst edge platform, what does the RMA process provide to the technician?

A technician to perform the replacement on-site

A free software upgrade to the latest IOS version

A replacement device with the same model and hardware capabilities

An NCS 5500 chassis has a failed line card. The technician has a replacement card of the same type. What should the technician do to ensure the replacement card is recognized and configured correctly?

Use the 'card type' command to manually configure the new card before installing it.

Remove the failed card, install the new one, and manually reconfigure the interfaces.

Back up the running configuration, install the new card, and restore the configuration.

Install the new card; the router will automatically provision it with the same configuration as the failed card.

What should be backed up from an ISR router before it is replaced?

The configuration and the IOS image

The startup configuration and the hardware serial number

The license file and the console password

CiscoCertified Field Technician (CCT)

Domain 5Objective 2

5.2 Describe the Process for Replacing Cisco Devices 800-150 Practice Questions (Page 2)

Part of the 5.0 Cisco Hardware Replacement domain, which accounts for 35% of the 800-150 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~18–28 in this domain), expect 5–7 from this objective — we provide 40 practice questions to prepare you well beyond it. (estimate)

40questions here

8free pages

14concepts

35%of the exam

14 Concepts in This Objective

Catalyst Switch Replacement
Catalyst Edge Platform Replacement
Meraki Switch Replacement
ISR Router Replacement
ASR Router Replacement
Cisco 8000 Series Replacement
NCS Series Replacement
Secure Firewall Replacement
Nexus Switch Replacement
MDS Switch Replacement
UCS Infrastructure Component Replacement
UCS B/C/X-Series Replacement
UCS E-Series Replacement
Collaboration Device Replacement

Questions 6–10

6foundation · easy
When replacing a Cisco Secure Firewall, what must be backed up to preserve security policies?
Select an answer first
7foundation · easy
What must be considered when physically swapping an MDS switch to avoid disrupting the SAN?
Select an answer first
8foundation · easy
When replacing a Cisco Catalyst edge platform, what does the RMA process provide to the technician?
Select an answer first
9application · medium
An NCS 5500 chassis has a failed line card. The technician has a replacement card of the same type. What should the technician do to ensure the replacement card is recognized and configured correctly?
Select an answer first
10foundation · easy
What should be backed up from an ISR router before it is replaced?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 800-150

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “800-150” is a trademark of its owner, used for identification only.