When replacing a Cisco ISR router, what must be transferred to the new device to ensure licensed features continue to work?

The serial number of the old router

The license file or license registration

A Cisco IP phone failed in an office. The technician has a replacement phone of the same model. The phone is registered to Cisco Unified Communications Manager (CUCM). What is the correct procedure to replace the phone?

Remove the failed phone from CUCM and add the new phone manually.

Back up the phone's configuration from the phone's web interface and restore it to the new phone.

Manually configure the phone's IP address and extension on the device itself.

Connect the new phone to the network; it will automatically register with CUCM and download its configuration.

When replacing a Cisco MDS switch, what SAN-specific configuration must be backed up?

Access control lists for management

CiscoCertified Field Technician (CCT)

Domain 5Objective 2

5.2 Describe the Process for Replacing Cisco Devices 800-150 Practice Questions (Page 3)

Part of the 5.0 Cisco Hardware Replacement domain, which accounts for 35% of the 800-150 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~18–28 in this domain), expect 5–7 from this objective — we provide 40 practice questions to prepare you well beyond it. (estimate)

40questions here

8free pages

14concepts

35%of the exam

14 Concepts in This Objective

Catalyst Switch Replacement
Catalyst Edge Platform Replacement
Meraki Switch Replacement
ISR Router Replacement
ASR Router Replacement
Cisco 8000 Series Replacement
NCS Series Replacement
Secure Firewall Replacement
Nexus Switch Replacement
MDS Switch Replacement
UCS Infrastructure Component Replacement
UCS B/C/X-Series Replacement
UCS E-Series Replacement
Collaboration Device Replacement

Questions 11–15

11foundation · easy
When replacing a Cisco UCS fabric interconnect, what must be backed up before the swap?
Select an answer first
12foundation · easy
When replacing a Cisco ISR router, what must be transferred to the new device to ensure licensed features continue to work?
Select an answer first
13application · medium
A Cisco IP phone failed in an office. The technician has a replacement phone of the same model. The phone is registered to Cisco Unified Communications Manager (CUCM). What is the correct procedure to replace the phone?
Select an answer first
14foundation · easy
Which UCS component is typically replaced without affecting the operation of the servers?
Select an answer first
15foundation · easy
When replacing a Cisco MDS switch, what SAN-specific configuration must be backed up?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 800-150

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “800-150” is a trademark of its owner, used for identification only.

5.2 Describe the Process for Replacing Cisco Devices 800-150 Practice Questions (Page 3)

Questions 11–15

When replacing a Cisco UCS fabric interconnect, what must be backed up before the swap?

When replacing a Cisco ISR router, what must be transferred to the new device to ensure licensed features continue to work?

A Cisco IP phone failed in an office. The technician has a replacement phone of the same model. The phone is registered to Cisco Unified Communications Manager (CUCM). What is the correct procedure to replace the phone?

Which UCS component is typically replaced without affecting the operation of the servers?

When replacing a Cisco MDS switch, what SAN-specific configuration must be backed up?

Keep studying — 5.0 Cisco Hardware Replacement