3.2 Configuring MS Switches 500-220 Practice Questions (Page 6)

Questions 26–30

1. 26foundation · easy

   What information is required to configure a static route on an MS switch?

   • AVLAN ID and switch port number
   • BDestination network and next-hop IP address
   • CSource IP address and destination port
   • DOSPF area ID and router ID
   Reveal Solution Discussion Select an answer first
2. 27application · medium

   A company wants to restrict network access on their MS switch ports so that only company-issued laptops can connect. They have a RADIUS server already in place. Which access policy configuration should be used?

   • A802.1X authentication with the RADIUS server as the authentication source.
   • BA QoS policy that prioritizes laptop traffic.
   • CA static route for the laptops' subnet.
   • DDisable the ports until a laptop is physically connected.
   Reveal Solution Discussion Select an answer first
4. 28foundation · easy

   What is the primary benefit of using OSPF on MS switches compared to static routes?

   • AOSPF provides better security than static routes
   • BOSPF requires less configuration than static routes
   • COSPF automatically adapts to network topology changes
   • DOSPF uses less CPU than static routes
   Reveal Solution Discussion Select an answer first
5. 29foundation · easy

   Which external server is typically used with 802.1X authentication on MS switches?

   • ADHCP server
   • BDNS server
   • CRADIUS server
   • DNTP server
   Reveal Solution Discussion Select an answer first
6. 30expert · hard

   A company has a mix of 802.1X-capable devices and legacy devices on the same MS switch. They want to enforce 802.1X on all ports but allow legacy devices to connect without authentication. What is the best way to achieve this while maintaining security?

   • ADisable 802.1X on ports where legacy devices are connected.
   • BUse a different VLAN for legacy devices and enable 802.1X only on the other VLAN.
   • CConfigure the legacy devices with 802.1X credentials.
   • DCreate an access policy that allows specific MAC addresses to bypass 802.1X.
   Reveal Solution Discussion Select an answer first