Which QoS marking is commonly used to prioritize traffic on a network?

DSCP (Differentiated Services Code Point)

What is the purpose of a Switch Virtual Interface (SVI) on an MS switch?

To provide a Layer 3 gateway for a VLAN

To connect the switch to an upstream router

To provide a management interface for the switch

A school district uses MS switches and wants to ensure that video conferencing traffic is not delayed during peak usage. They have enabled QoS and set DSCP tags on the video conferencing endpoints. What should the administrator verify on the MS switches to ensure the DSCP tags are honored?

The QoS policy on the switch ports is set to 'Trust' for DSCP tags.

The switch has a default route configured.

The video conferencing endpoints are using static IP addresses.

The switch ports are configured with the correct VLAN.

A hospital uses MS switches to connect VoIP phones and workstations. They want to ensure voice traffic is prioritized over data traffic on the access ports. What is the first step the administrator should take in the Meraki dashboard to achieve this?

Enable 802.1X authentication on the access ports.

Disable STP on the access ports.

Configure a QoS policy that trusts the DSCP tags on the VoIP traffic.

Create a new VLAN for the VoIP phones.

A network administrator needs to enable routing between VLANs on an MS switch. Which configuration must be performed in the Meraki dashboard?

Create a static route for each VLAN

Enable Layer 3 routing and configure an SVI for each VLAN

Assign an access policy to each VLAN

CiscoMeraki Solutions Specialist (ECMS)

Domain 3Objective 2

3.2 Configuring MS Switches 500-220 Practice Questions (Page 5)

Part of the Implementation domain, which accounts for 25% of the 500-220 exam. Cisco does not publish an official question count, but from its 90-minute exam (~35–60 total, ~9–15 in this domain), expect 2–3 from this objective — we provide 30 practice questions to prepare you well beyond it. (estimate)

30questions here

6free pages

8concepts

25%of the exam

Questions 21–25

21foundation · easy
Which QoS marking is commonly used to prioritize traffic on a network?
Select an answer first
22foundation · easy
What is the purpose of a Switch Virtual Interface (SVI) on an MS switch?
Select an answer first
23application · medium
A school district uses MS switches and wants to ensure that video conferencing traffic is not delayed during peak usage. They have enabled QoS and set DSCP tags on the video conferencing endpoints. What should the administrator verify on the MS switches to ensure the DSCP tags are honored?
Select an answer first
24application · medium
A hospital uses MS switches to connect VoIP phones and workstations. They want to ensure voice traffic is prioritized over data traffic on the access ports. What is the first step the administrator should take in the Meraki dashboard to achieve this?
Select an answer first
25foundation · easy
A network administrator needs to enable routing between VLANs on an MS switch. Which configuration must be performed in the Meraki dashboard?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 500-220

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “500-220” is a trademark of its owner, used for identification only.