What is the purpose of an access policy on an MS switch?

To control network access based on user or device

To configure routing between VLANs

To prioritize traffic on the network

An administrator has configured a new MS switch with a specific access policy and QoS settings. They need to apply the exact same configuration to five other switches in the same network. What is the most efficient way to do this in the Meraki dashboard?

Use the 'Clone' feature to copy the configuration from the source switch to the target switches.

Create a new network and move all switches to it.

Export the configuration as a script and run it on each switch.

Manually configure each switch with the same settings.

When would you configure a static route on an MS switch?

To automatically learn routes from neighboring routers

To provide a default gateway for devices in a VLAN

To reach a network that is not advertised by a dynamic routing protocol

To enable routing between VLANs on the switch

A multi-floor office uses MS switches with SVIs for each floor's VLAN. They want to enable OSPF between the switch stacks and a core router. What must be configured on the MS switches to participate in OSPF?

Configure a default gateway on each switch stack.

Create static routes for each VLAN pointing to the core router.

Enable OSPF and add the SVIs to the OSPF routing process.

A company has a guest network and a corporate network on the same MS switch. They want to ensure that guest devices cannot access the corporate network. What is the most appropriate configuration?

Configure QoS to prioritize corporate traffic over guest traffic.

Use static routes to prevent guest traffic from reaching the corporate VLAN.

Enable 802.1X on all ports and require guest devices to authenticate.

Create separate VLANs for guest and corporate traffic, and use access policies to restrict inter-VLAN traffic.

CiscoMeraki Solutions Specialist (ECMS)

Domain 3Objective 2

3.2 Configuring MS Switches 500-220 Practice Questions (Page 4)

Part of the Implementation domain, which accounts for 25% of the 500-220 exam. Cisco does not publish an official question count, but from its 90-minute exam (~35–60 total, ~9–15 in this domain), expect 2–3 from this objective — we provide 30 practice questions to prepare you well beyond it. (estimate)

30questions here

6free pages

8concepts

25%of the exam

Questions 16–20

16foundation · easy
What is the purpose of an access policy on an MS switch?
Select an answer first
17application · medium
An administrator has configured a new MS switch with a specific access policy and QoS settings. They need to apply the exact same configuration to five other switches in the same network. What is the most efficient way to do this in the Meraki dashboard?
Select an answer first
18foundation · easy
When would you configure a static route on an MS switch?
Select an answer first
19application · medium
A multi-floor office uses MS switches with SVIs for each floor's VLAN. They want to enable OSPF between the switch stacks and a core router. What must be configured on the MS switches to participate in OSPF?
Select an answer first
20application · medium
A company has a guest network and a corporate network on the same MS switch. They want to ensure that guest devices cannot access the corporate network. What is the most appropriate configuration?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 500-220

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “500-220” is a trademark of its owner, used for identification only.