A network admin is using the GUI of a Cisco 9800 controller to create a new WLAN. After clicking 'Add' on the WLANs page, which fields are required to create the WLAN profile before proceeding to security settings?

RADIUS server and shared secret

When configuring a WLAN with WPA2-PSK security on a Cisco WLC, which two parameters must be specified?

Pre-Shared Key and RADIUS shared secret

RADIUS server IP and shared secret

A company has a WLAN that uses WPA2 PSK. The passphrase was recently changed, but some users report they can still connect with the old passphrase. The administrator verifies the new passphrase is correctly configured in the GUI. What is the most likely reason for this behavior?

The clients have not yet re-associated after the passphrase change

The WLAN is configured with multiple PSKs

The controller is still using the old configuration due to a delayed push

The clients are using cached credentials from a previous session

A network administrator has configured a WPA2 PSK WLAN on a Cisco 9800 controller. The WLAN is enabled and bound to a policy profile. Users can see the SSID, but when they try to connect, they are repeatedly disconnected. The administrator checks the controller's logs and sees 'RADIUS server unreachable' messages. What is the most likely cause?

The access point is not joined to the controller.

The WLAN is configured for WPA2 Enterprise instead of WPA2 PSK.

The client's passphrase is incorrect.

CiscoCertified Network Associate (CCNA)

Domain 5Objective 10

5.10 Configure and Verify WLAN Within the GUI Using WPA2 PSK 200-301 Practice Questions (Page 4)

Part of the Security Fundamentals domain, which accounts for 15% of the 200-301 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~8–12 in this domain), expect 1–1 from this objective — we provide 32 practice questions to prepare you well beyond it. (estimate)

32questions here

7free pages

4concepts

15%of the exam

Questions 16–20

16application · medium
A network admin is using the GUI of a Cisco 9800 controller to create a new WLAN. After clicking 'Add' on the WLANs page, which fields are required to create the WLAN profile before proceeding to security settings?
Select an answer first
17foundation · easy
When configuring a WLAN with WPA2-PSK security on a Cisco WLC, which two parameters must be specified?
Select an answer first
18foundation · easy
When creating a new WLAN profile in the Cisco WLC GUI, which of the following must be provided on the General tab?
Select an answer first
19expert · hard
A company has a WLAN that uses WPA2 PSK. The passphrase was recently changed, but some users report they can still connect with the old passphrase. The administrator verifies the new passphrase is correctly configured in the GUI. What is the most likely reason for this behavior?
Select an answer first
20expert · hard
A network administrator has configured a WPA2 PSK WLAN on a Cisco 9800 controller. The WLAN is enabled and bound to a policy profile. Users can see the SSID, but when they try to connect, they are repeatedly disconnected. The administrator checks the controller's logs and sees 'RADIUS server unreachable' messages. What is the most likely cause?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 200-301

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “200-301” is a trademark of its owner, used for identification only.

5.10 Configure and Verify WLAN Within the GUI Using WPA2 PSK 200-301 Practice Questions (Page 4)

Questions 16–20

A network admin is using the GUI of a Cisco 9800 controller to create a new WLAN. After clicking 'Add' on the WLANs page, which fields are required to create the WLAN profile before proceeding to security settings?

When configuring a WLAN with WPA2-PSK security on a Cisco WLC, which two parameters must be specified?

When creating a new WLAN profile in the Cisco WLC GUI, which of the following must be provided on the General tab?

A company has a WLAN that uses WPA2 PSK. The passphrase was recently changed, but some users report they can still connect with the old passphrase. The administrator verifies the new passphrase is correctly configured in the GUI. What is the most likely reason for this behavior?

Keep studying — Security Fundamentals