A network engineer is troubleshooting a WLAN that was recently changed from WPA2 Enterprise to WPA2 PSK. Users report that they can see the SSID but cannot connect. The engineer suspects the security mode change did not take effect. Which GUI verification step would confirm whether the change was applied?

Check the client list to see if any clients are connected

Check the WLAN's Security tab to see if 'WPA2 PSK' is selected and the passphrase is set

Check the access point's radio channel and power settings

Check the controller's syslog for 'WLAN updated' messages

An administrator is configuring a WLAN for a small branch office. The requirement is to use WPA2 PSK with a passphrase that is at least 12 characters. During configuration, the GUI displays an error when the administrator enters a passphrase. What is the most likely cause?

The passphrase is shorter than 8 characters

The passphrase contains a space

A small office has a Cisco wireless controller and one access point. The manager wants to create a new guest WLAN that uses WPA2 PSK with a passphrase that is easy for visitors to type. While configuring the WLAN in the GUI, which two parameters must the administrator set to meet the requirement?

Passphrase and management VLAN ID

In the Cisco WLC GUI, after clicking the WLANs tab under Configuration, what action is required to begin configuring an existing WLAN?

Click the 'Apply' button on the WLANs page

Click the WLAN ID number or profile name

Click the 'Enable' checkbox next to the WLAN

Click the 'New' button and enter a new SSID

A network administrator needs to configure a new wireless network on a Cisco wireless LAN controller. In the controller's GUI, which menu path is used to access the WLAN configuration settings?

Configuration > Network > Interfaces

Administration > Management > SNMP

Configuration > Wireless > WLANs

CiscoCertified Network Associate (CCNA)

Domain 5Objective 10

5.10 Configure and Verify WLAN Within the GUI Using WPA2 PSK 200-301 Practice Questions (Page 1)

Part of the Security Fundamentals domain, which accounts for 15% of the 200-301 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~8–12 in this domain), expect 1–1 from this objective — we provide 32 practice questions to prepare you well beyond it. (estimate)

32questions here

7free pages

4concepts

15%of the exam

Questions 1–5

1expert · medium
A network engineer is troubleshooting a WLAN that was recently changed from WPA2 Enterprise to WPA2 PSK. Users report that they can see the SSID but cannot connect. The engineer suspects the security mode change did not take effect. Which GUI verification step would confirm whether the change was applied?
Select an answer first
2application · medium
An administrator is configuring a WLAN for a small branch office. The requirement is to use WPA2 PSK with a passphrase that is at least 12 characters. During configuration, the GUI displays an error when the administrator enters a passphrase. What is the most likely cause?
Select an answer first
3application · medium
A small office has a Cisco wireless controller and one access point. The manager wants to create a new guest WLAN that uses WPA2 PSK with a passphrase that is easy for visitors to type. While configuring the WLAN in the GUI, which two parameters must the administrator set to meet the requirement?
Select an answer first
4foundation · easy
In the Cisco WLC GUI, after clicking the WLANs tab under Configuration, what action is required to begin configuring an existing WLAN?
Select an answer first
5foundation · easy
A network administrator needs to configure a new wireless network on a Cisco wireless LAN controller. In the controller's GUI, which menu path is used to access the WLAN configuration settings?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 200-301

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “200-301” is a trademark of its owner, used for identification only.