CiscoCertified Network Associate (CCNA)
Domain 2Objective 1
2.1 Configure and Verify VLANs (normal Range) Spanning Multiple Switches 200-301 Practice Questions (Page 1)
Part of the Network Access domain, which accounts for 20% of the 200-301 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~10–16 in this domain), expect 1–2 from this objective — we provide 32 practice questions to prepare you well beyond it. (estimate)
32questions here
7free pages
8concepts
20%of the exam
Questions 1–5
- 1
A small office has two VLANs: VLAN 10 for staff and VLAN 20 for guests. A router with a single GigabitEthernet interface is connected to a switch. The switch port connected to the router is configured as a trunk. The router needs to route between the two VLANs. Which configuration is required on the router?
Select an answer first - 2
What is the purpose of configuring a trunk link between two switches?
Select an answer first - 3
Which command verifies that a port is operating as a trunk and shows which VLANs are allowed on the trunk?
Select an answer first - 4
A security audit recommends that no user traffic should be carried on the default VLAN. The network has multiple switches with trunk links. Currently, all access ports are assigned to VLAN 1. What is the best practice to comply with this recommendation?
Select an answer first - 5
Which two commands are required to configure a switch port as an access port in VLAN 10?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “200-301” is a trademark of its owner, used for identification only.