An administrator is creating a WLAN for a university campus. The WLAN must use WPA2 PSK and be available on all access points. The administrator creates the WLAN and assigns it to the default AP group. However, the WLAN is not broadcasting on some APs. What is the most likely cause?

The WLAN's passphrase is incorrect on those APs

The WLAN's SSID is hidden on those APs

The APs have a radio that is disabled

The WLAN is not enabled on those APs because they are in a different AP group

A network administrator needs to modify the security settings of an existing WLAN on a Cisco 9800 wireless controller. In the GUI, where should the administrator navigate to change the WPA2 PSK passphrase?

Configuration > Services > RADIUS > select the server > Security tab

Configuration > Network > Interfaces > select the interface > Security tab

Configuration > Wireless > WLANs > select the WLAN > Security tab

Configuration > Wireless > Access Points > select the AP > Radio tab

A client is unable to connect to a newly configured WPA2-PSK WLAN. In the Cisco WLC GUI, which status indicator would most directly confirm that the WLAN is enabled and broadcasting?

The WLAN's Status column shows 'Enabled'

The WLAN's Security column shows 'WPA2'

The WLAN's Client Count is greater than zero

The WLAN's Profile Name is visible

A network administrator is troubleshooting a WPA2 PSK WLAN on a Cisco 9800 controller. A user reports that they cannot connect. The administrator sees in the GUI that the client is in the 'Associated' state but not 'Authenticated'. The administrator checks the WLAN's security settings and confirms the passphrase is correct. What should the administrator check next?

Check the WLAN's VLAN assignment.

Check the client's wireless adapter settings to ensure it is using WPA2-PSK and not WPA2-Enterprise.

Check the controller's CPU and memory utilization.

Check the access point's radio channel and power settings.

CiscoCertified Network Associate (CCNA)

Domain 5Objective 10

5.10 Configure and Verify WLAN Within the GUI Using WPA2 PSK 200-301 Practice Questions (Page 3)

Part of the Security Fundamentals domain, which accounts for 15% of the 200-301 exam. Cisco does not publish an official question count, but from its 120-minute exam (~50–80 total, ~8–12 in this domain), expect 1–1 from this objective — we provide 32 practice questions to prepare you well beyond it. (estimate)

32questions here

7free pages

4concepts

15%of the exam

Questions 11–15

11expert · hard
An administrator is creating a WLAN for a university campus. The WLAN must use WPA2 PSK and be available on all access points. The administrator creates the WLAN and assigns it to the default AP group. However, the WLAN is not broadcasting on some APs. What is the most likely cause?
Select an answer first
12application · medium
A network administrator needs to modify the security settings of an existing WLAN on a Cisco 9800 wireless controller. In the GUI, where should the administrator navigate to change the WPA2 PSK passphrase?
Select an answer first
13foundation · easy
A network administrator is configuring a WLAN with WPA2-PSK security in the Cisco WLC GUI. What is the minimum length of the pre-shared key (passphrase) that must be entered?
Select an answer first
14foundation · easy
A client is unable to connect to a newly configured WPA2-PSK WLAN. In the Cisco WLC GUI, which status indicator would most directly confirm that the WLAN is enabled and broadcasting?
Select an answer first
15expert · hard
A network administrator is troubleshooting a WPA2 PSK WLAN on a Cisco 9800 controller. A user reports that they cannot connect. The administrator sees in the GUI that the client is in the 'Associated' state but not 'Authenticated'. The administrator checks the WLAN's security settings and confirms the passphrase is correct. What should the administrator check next?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to 200-301

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Cisco. “200-301” is a trademark of its owner, used for identification only.

5.10 Configure and Verify WLAN Within the GUI Using WPA2 PSK 200-301 Practice Questions (Page 3)

Questions 11–15

An administrator is creating a WLAN for a university campus. The WLAN must use WPA2 PSK and be available on all access points. The administrator creates the WLAN and assigns it to the default AP group. However, the WLAN is not broadcasting on some APs. What is the most likely cause?

A network administrator needs to modify the security settings of an existing WLAN on a Cisco 9800 wireless controller. In the GUI, where should the administrator navigate to change the WPA2 PSK passphrase?

A network administrator is configuring a WLAN with WPA2-PSK security in the Cisco WLC GUI. What is the minimum length of the pre-shared key (passphrase) that must be entered?

A client is unable to connect to a newly configured WPA2-PSK WLAN. In the Cisco WLC GUI, which status indicator would most directly confirm that the WLAN is enabled and broadcasting?

Keep studying — Security Fundamentals