What is the purpose of IPSec VPN in NSX?

To provide load balancing for web servers

To provide DHCP services to remote clients

To route traffic between logical segments

To provide secure encrypted communication between two sites over the internet

What is a common use case for VRF Lite in NSX?

Enabling Layer 2 bridging between sites

Providing failover for Tier-1 gateways

Increasing the bandwidth of a single logical segment

Providing separate routing domains for different tenants or business units on shared gateway infrastructure

A VM on a logical segment connected to a Tier-1 gateway needs to communicate with a server on a different logical segment connected to the same Tier-1 gateway. Both segments are in the same NSX overlay. How does the packet traverse the NSX logical routing components?

The packet is sent to the Tier-0 gateway, which routes it to the destination segment.

The packet is sent to the service router (SR) of the Tier-1 gateway on an Edge node for routing.

The packet is sent to the physical router via the Tier-0 gateway for routing.

The packet is routed by the distributed router (DR) component of the Tier-1 gateway directly on the ESXi host.

What is the function of an NSX Edge node in the NSX architecture?

To host the NSX management plane and control plane

To store virtual machine disk files for the cluster

To provide distributed firewall and load balancing services

To provide centralized network services such as routing, NAT, and VPN

What is an OSPF area in the context of NSX Tier-0 gateway configuration?

A logical grouping of OSPF routers that share the same link-state database

A type of OSPF authentication method

A physical location where OSPF routers are installed

A set of firewall rules applied to OSPF traffic

VMwareCertified Professional – Network Virtualization (VCP-NV)

Domain 1Objective 2

Logical Routing and Networking Services VCP-NV Practice Questions (Page 3)

Part of the VMware Solution (NSX) domain, which makes up ~33% of our current practice bank.

34questions here

7free pages

14concepts

Questions 11–15

11foundation · easy
What is the purpose of IPSec VPN in NSX?
Select an answer first
12foundation · easy
What is a common use case for VRF Lite in NSX?
Select an answer first
13application · medium
A VM on a logical segment connected to a Tier-1 gateway needs to communicate with a server on a different logical segment connected to the same Tier-1 gateway. Both segments are in the same NSX overlay. How does the packet traverse the NSX logical routing components?
Select an answer first
14foundation · easy
What is the function of an NSX Edge node in the NSX architecture?
Select an answer first
15foundation · easy
What is an OSPF area in the context of NSX Tier-0 gateway configuration?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to VCP-NV

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by VMware. “VCP-NV” is a trademark of its owner, used for identification only.