Reviewing and Preparing a Site for Implementation of E-Series CERTIFIED-IMPLEMENTATION-ENGINEER-SAN-E-SERIES Practice Questions (Page 5)

Questions 21–25

1. 21application · medium

   An administrator is preparing for an E-Series installation. The administrator has the floor plan and power specifications, but the network diagram is missing. The administrator needs to verify that the network switches have enough ports for the storage system. What should the administrator do?

   • AAssume the switches have enough ports and proceed.
   • BRequest the network diagram from the network team to verify port availability.
   • CProceed with the installation and connect the storage system to any available port.
   • DUse a network tap to connect the storage system.
   Reveal Solution Discussion Select an answer first
2. 22application · medium

   A technician is unpacking an E-Series system at the customer site. The packing list indicates that the system includes two controllers, 24 drives, and two power supplies. During the hardware inventory check, the technician finds only 22 drives. What should the technician do?

   • AStop the installation and contact the supplier to resolve the missing drives.
   • BContact the shipping company to file a claim for the missing drives.
   • CUse drives from another project to complete the installation.
   • DProceed with the installation using the 22 drives and note the discrepancy in the installation report.
   Reveal Solution Discussion Select an answer first
4. 23application · medium

   A data center is installing an E-Series system. The room has a temperature of 25°C (77°F) and a relative humidity of 60%. The E-Series specification allows a temperature range of 10°C to 35°C and a humidity range of 20% to 80%. What should the administrator do?

   • AProceed with the installation because the conditions are within the specified ranges.
   • BInstall a dehumidifier to reduce the humidity to 40%.
   • CIncrease the temperature to 30°C to reduce the relative humidity.
   • DDelay the installation until the humidity is lower.
   Reveal Solution Discussion Select an answer first
5. 24application · medium

   A company is installing an E-Series system in a room that also houses a large UPS. The UPS generates significant heat. The room's cooling is designed for the UPS alone. The administrator is assessing the environmental conditions. What should the administrator do?

   • AInstall the system and monitor the temperature.
   • BMove the UPS to a different room to reduce heat.
   • CCalculate the total heat load and ensure the cooling capacity is adequate.
   • DInstall the E-Series system and rely on the existing cooling.
   Reveal Solution Discussion Select an answer first
6. 25foundation · easy

   Which of the following is an environmental factor to assess during an E-Series site assessment?

   • ACache memory size
   • BFibre channel port speed
   • CStorage capacity
   • DRelative humidity
   Reveal Solution Discussion Select an answer first