A company is installing an E-Series system in a room that has a raised floor. The room's cooling is provided by a CRAC unit that supplies cool air through the raised floor. The administrator is reviewing the site preparation checklist and notices that the perforated tiles are located near the rear of the rack. What should the administrator do?

Proceed with the installation because the cool air will circulate around the rack.

Add a fan to the rear of the rack to pull air through.

Rearrange the perforated tiles to direct cool air to the front of the rack.

Install the system and rely on the room's ambient cooling.

What is the primary purpose of completing a pre-installation checklist for an E-Series system?

To document the final storage configuration for the customer

To ensure all steps and conditions are met before beginning physical installation

To record the serial numbers of all components for warranty purposes

To provide a training guide for the storage administrator

Which item would typically be included on a pre-installation checklist for an E-Series deployment?

The storage system has been formatted with the latest file system

The initial volume has been created and mapped

The host has been added to the storage group

All necessary cables are available and correctly labeled

Which document is essential to collect during the documentation gathering phase for an E-Series implementation?

The host's operating system installation media

The storage array's serial number

Floor plans showing rack locations and clearances

A data center is preparing to install an E-Series system. The site has a 30A 208V power circuit available, but the E-Series system requires a 20A 240V circuit. The administrator is reviewing the site preparation requirements. What should the administrator do?

Arrange for an electrician to install the correct 20A 240V circuit.

Use the 30A 208V circuit with an adapter to connect the system.

Install the system and monitor for power issues.

Proceed with installation and use a step-down transformer.

NetAppCertified Implementation Engineer - SAN Specialist, E-Series (NCIE-SAN E-Series)

Domain 2Objective 1

Reviewing and Preparing a Site for Implementation of E-Series CERTIFIED-IMPLEMENTATION-ENGINEER-SAN-E-SERIES Practice Questions (Page 4)

Part of the Documentation domain, which makes up ~9% of our current practice bank.

25questions here

5free pages

5concepts

Questions 16–20

16expert · hard
A company is installing an E-Series system in a room that has a raised floor. The room's cooling is provided by a CRAC unit that supplies cool air through the raised floor. The administrator is reviewing the site preparation checklist and notices that the perforated tiles are located near the rear of the rack. What should the administrator do?
Select an answer first
17foundation · easy
What is the primary purpose of completing a pre-installation checklist for an E-Series system?
Select an answer first
18foundation · easy
Which item would typically be included on a pre-installation checklist for an E-Series deployment?
Select an answer first
19foundation · easy
Which document is essential to collect during the documentation gathering phase for an E-Series implementation?
Select an answer first
20application · medium
A data center is preparing to install an E-Series system. The site has a 30A 208V power circuit available, but the E-Series system requires a 20A 240V circuit. The administrator is reviewing the site preparation requirements. What should the administrator do?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to CERTIFIED-IMPLEMENTATION-ENGINEER-SAN-E-SERIES

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by NetApp. “CERTIFIED-IMPLEMENTATION-ENGINEER-SAN-E-SERIES” is a trademark of its owner, used for identification only.