In an EVPN-VXLAN network, what is the primary purpose of the Ethernet Auto-Discovery (A-D) route type 1?

To elect the Designated Forwarder for a multi-homed segment

To signal per-EVI and per-ESI information for aliasing and mass withdrawal

To build the multicast tunnel for BUM traffic

To advertise MAC addresses learned from the local segment

In an EVPN multi-homing scenario, which route type is used to discover other PEs connected to the same Ethernet Segment?

Route type 4 (Ethernet Segment)

Route type 2 (MAC/IP Advertisement)

In an EVPN multi-homing scenario, which route type is used to share IGMP membership information between PEs attached to the same segment?

Route type 3 (Inclusive Multicast)

Route type 8 (Multicast Leave Synch)

Route type 7 (Multicast Membership Report Synch)

Route type 4 (Ethernet Segment)

What is the primary role of the EVPN Route type 3 (Inclusive Multicast Ethernet Tag) route?

To elect the Designated Forwarder for a multi-homed segment

To signal the loss of connectivity to an Ethernet Segment

To advertise MAC addresses for unicast forwarding

To build the multicast tunnel and distribute the ingress replication list

Which EVPN route type is advertised per Ethernet Segment and is used to inform remote PEs that a PE is attached to that segment?

Route type 2 (MAC/IP Advertisement)

Route type 1 (Ethernet A-D) per-ESI

Route type 3 (Inclusive Multicast)

Juniper NetworksCertified Professional, Data Center (JNCIP-DC)

Domain 4Objective 1

EVPN Route Types JN0-683 Practice Questions (Page 6)

Part of the EVPN-VXLAN Signaling domain, which makes up ~27% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~9–16 in this domain), expect 1–2 from this objective — we provide 48 practice questions to prepare you well beyond it. (estimate)

48questions here

10free pages

19concepts

19 Concepts in This Objective

EVPN route type overview
Route type 1: Ethernet Auto-Discovery (A-D) route
Route type 2: MAC/IP Advertisement route
Route type 3: Inclusive Multicast Ethernet Tag route
Route type 4: Ethernet Segment route
Route type 5: IP Prefix route
Route type 6: Selective Multicast Ethernet Tag route
Route type 7: Multicast Membership Report Synch route
Route type 8: Multicast Leave Synch route
Route type 9: MAC/IP Advertisement route with ESI
Route type 10: Ethernet A-D route for per-ESI
Route type 11: Ethernet A-D route for per-EVI
Route type 12: IP Prefix route with ESI
Route type 13: MAC/IP Advertisement route with ESI-Import RT
Route type 14: Ethernet Segment route with ESI-Import RT
Route type 15: EVPN route target and import/export rules
Route type 16: EVPN route preference and selection
Route type 17: EVPN route advertisement in VXLAN
Route type 18: EVPN route types for multi-homing

Questions 26–30

26foundation · easy
In an EVPN-VXLAN network, what is the primary purpose of the Ethernet Auto-Discovery (A-D) route type 1?
Select an answer first
27foundation · easy
In an EVPN multi-homing scenario, which route type is used to discover other PEs connected to the same Ethernet Segment?
Select an answer first
28foundation · easy
In an EVPN multi-homing scenario, which route type is used to share IGMP membership information between PEs attached to the same segment?
Select an answer first
29foundation · easy
What is the primary role of the EVPN Route type 3 (Inclusive Multicast Ethernet Tag) route?
Select an answer first
30foundation · easy
Which EVPN route type is advertised per Ethernet Segment and is used to inform remote PEs that a PE is attached to that segment?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-683

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-683” is a trademark of its owner, used for identification only.