Network Layer Reachability Information (NLRI) Families - Inet, Inet6 JN0-650 Practice Questions (Page 2)

Questions 6–10

1. 6foundation · easy

   Which Junos configuration stanza is used to enable the exchange of inet and inet6 NLRI families in BGP?

   • Afamily inet { unicast; }
   • Baddress-family inet { unicast; }
   • Cprotocols bgp { family inet; }
   • Dnlri inet { unicast; }
   Reveal Solution Discussion Select an answer first
2. 7application · medium

   You are troubleshooting a BGP session between two Junos routers. The session is up, but you notice that IPv6 routes are not being exchanged, even though IPv4 routes are. You have confirmed that both routers have IPv6 addresses configured on their interfaces. What is the most likely cause?

   • AThe IPv6 next-hop is not reachable.
   • BThe IPv6 routes are not in the routing table.
   • CThe BGP session is not established.
   • DThe 'family inet6 unicast' is not configured on the BGP group.
   Reveal Solution Discussion Select an answer first
4. 8foundation · easy

   Which statement best describes the role of the inet NLRI family in BGP?

   • AIt carries MPLS labels for VPN routes.
   • BIt carries IPv6 unicast routes and their attributes.
   • CIt carries IPv4 unicast routes and their attributes.
   • DIt carries multicast group membership information.
   Reveal Solution Discussion Select an answer first
5. 9foundation · easy

   In BGP on Junos, which NLRI family is used to carry IPv4 unicast routes?

   • Aiso
   • Binet6
   • Cinet-vpn
   • Dinet
   Reveal Solution Discussion Select an answer first
6. 10foundation · easy

   What is the primary role of the inet6 NLRI family in BGP?

   • ATo carry IPv4 unicast routes between BGP peers.
   • BTo carry IPv6 multicast group membership.
   • CTo carry MPLS labels for IPv6 VPNs.
   • DTo carry IPv6 unicast routes between BGP peers.
   Reveal Solution Discussion Select an answer first