Which command provides a real-time view of BGP route updates as they are received and processed by the router?

`show route advertising-protocol bgp`

A company has two upstream providers, ISP-A and ISP-B. They want to prefer ISP-A for outbound traffic, but if ISP-A's link fails, they want to automatically use ISP-B. Which configuration should be used?

Set a higher MED on routes learned from ISP-A.

Set a higher local-preference on routes learned from ISP-A.

Configure a static route to ISP-A with a lower administrative distance.

Use AS path prepending on ISP-A.

A BGP session is established, but the router is not receiving any routes from its peer. Which command is most useful to verify whether the peer is sending routes?

`show route receive-protocol bgp`

To verify the BGP session state and the number of routes exchanged with a specific peer, which command is most appropriate?

`show configuration protocols bgp`

A network engineer must configure a BGP session with a service provider that requires the local router to use a specific IP address as the source for all BGP packets. Which configuration element accomplishes this?

Set the `multihop` statement to allow non-directly connected peers.

Set the `export` policy to match the source address.

Set the `local-address` statement under the BGP group or neighbor.

Set the `passive` statement under the BGP group.

Juniper NetworksCertified Professional, Enterprise Routing and Switching (JNCIP-ENT)

Domain 2Objective 9

Configuration, Troubleshooting, and Monitoring in Scenario-Based Contexts JN0-650 Practice Questions (Page 1)

Part of the BGP domain, which makes up ~22% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~8–13 in this domain), expect 1–1 from this objective — we provide 11 practice questions to prepare you well beyond it. (estimate)

11questions here

3free pages

3concepts

Questions 1–5

1foundation · easy
Which command provides a real-time view of BGP route updates as they are received and processed by the router?
Select an answer first
2application · medium
A company has two upstream providers, ISP-A and ISP-B. They want to prefer ISP-A for outbound traffic, but if ISP-A's link fails, they want to automatically use ISP-B. Which configuration should be used?
Select an answer first
3foundation · easy
A BGP session is established, but the router is not receiving any routes from its peer. Which command is most useful to verify whether the peer is sending routes?
Select an answer first
4foundation · easy
To verify the BGP session state and the number of routes exchanged with a specific peer, which command is most appropriate?
Select an answer first
5foundation · easy
A network engineer must configure a BGP session with a service provider that requires the local router to use a specific IP address as the source for all BGP packets. Which configuration element accomplishes this?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-650

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-650” is a trademark of its owner, used for identification only.