Cable Map JN0-481 Practice Questions (Page 4)

Questions 16–18

1. 16foundation · easy

   A device in the fabric is not forming a link with its neighbor. How can the cable map help in troubleshooting this issue?

   • ABy providing the routing table of the device
   • BBy displaying the device's CPU and memory usage
   • CBy showing whether the physical link is present and correctly connected
   • DBy suggesting a new IP addressing scheme
   Reveal Solution Discussion Select an answer first
2. 17foundation · easy

   In the Apstra build and deploy phases, what is the primary purpose of the cable map?

   • ATo document the logical overlay topology and routing protocols
   • BTo list all IP addresses and VLAN assignments in the fabric
   • CTo provide a template for ordering cabling hardware from vendors
   • DTo display the physical connectivity between devices and ports as discovered from the network
   Reveal Solution Discussion Select an answer first
3. 18expert · hard

   An engineer is troubleshooting a connectivity issue between leaf-9 and spine-4. The Apstra cable map shows the link as 'connected', but the engineer cannot ping from leaf-9 to spine-4. The engineer has verified that the interface is up and IP addressing is correct. What should the engineer check next?

   • AThe VLAN configuration on both devices.
   • BThe LLDP configuration on both devices.
   • CThe Apstra blueprint to ensure the link is in the design.
   • DThe physical cable, since the cable map may be wrong.
   Reveal Solution Discussion Select an answer first