Juniper NetworksCertified Specialist, Service Provider Routing and Switching (JNCIS-SP)
Domain 9Objective 1
Tunneling Applications and Considerations JN0-364 Practice Questions (Page 4)
Part of the Tunnels domain, which makes up ~4% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~1–2 in this domain), expect 1–1 from this objective — we provide 23 practice questions to prepare you well beyond it. (estimate)
23questions here
5free pages
2concepts
Questions 16–20
- 16
When deploying a tunnel, which factor must be considered to ensure that the payload size does not exceed the path MTU?
Select an answer first - 17
A network engineer is designing a tunnel to carry 1500-byte IP packets across a service provider backbone. The tunnel will use GRE with an additional IP header. The engineer must ensure that no fragmentation occurs. What is the maximum MTU that should be set on the tunnel interface?
Select an answer first - 18
A service provider is deploying a new VPN service for a customer that requires the same IP address space to be used at multiple sites without conflict. The customer wants the sites to communicate directly at Layer 3. Which tunneling application should be used?
Select an answer first - 19
A service provider is planning to offer a secure tunnel service to customers who need to connect remote sites over the public internet. The service must provide confidentiality, integrity, and authentication. Which tunneling technology should be used?
Select an answer first - 20
A provider wants to offer a secure tunnel service that carries both IPv4 and IPv6 traffic from customer sites to a central gateway. The tunnel must support encryption and be able to traverse NAT devices. Which tunneling technology is most appropriate?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-364” is a trademark of its owner, used for identification only.