A service provider is migrating a customer from a legacy VPN to a new MPLS L3VPN. The customer has overlapping IP addresses with another customer. The engineer must ensure that both customers can use the same IP ranges without conflict. Which configuration is required?

Configure both customers in a forwarding instance with unique route distinguishers.

Configure each customer in a separate VRF instance with unique route distinguishers.

Configure both customers in the same VRF instance with different route distinguishers.

Configure both customers in a virtual-router instance with different route targets.

A network engineer is troubleshooting a RIB group that is not importing routes as expected. The engineer has verified the configuration and the import policy. Which additional check should be performed to diagnose the issue?

Check the BGP session status using 'show bgp summary'.

Check the routing table of the source instance using 'show route table inet.0'.

Check the interface status using 'show interfaces terse'.

Check the RIB group's operational state using 'show route rib-group'.

An engineer is configuring a RIB group to import routes from the master routing table into a VRF instance. The engineer wants to control which routes are imported using a policy. Which configuration element is required to apply the policy to the RIB group?

protocols bgp group import policy

export-policy statement within the RIB group configuration

import-policy statement within the RIB group configuration

routing-options static route with a policy

A network engineer is troubleshooting a routing issue in a VRF instance. The VRF has a route to 10.0.0.0/8 via next-hop 192.168.1.1, but the next-hop is not reachable in the VRF's routing table. What is the most likely result?

The route is used but with a warning message.

The route is hidden and not used for forwarding.

The route is automatically resolved via the master routing table.

The route is still installed in the forwarding table and traffic is forwarded.

A network administrator is configuring a VRF instance and needs to ensure that routes from the master routing table are available for next-hop resolution within the VRF. What should be configured?

A static default route in the VRF pointing to the master router.

A BGP session between the VRF and the master routing table.

The 'auto-export' statement on the VRF.

A RIB group that imports inet.0 routes into the VRF's table.

Juniper NetworksCertified Specialist, Service Provider Routing and Switching (JNCIS-SP)

Domain 1Objective 3

Routing Instances Including Routing Information Base (RIB) Group JN0-364 Practice Questions (Page 3)

Part of the Protocol-Independent Routing domain, which makes up ~7% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~2–4 in this domain), expect 1–1 from this objective — we provide 19 practice questions to prepare you well beyond it. (estimate)

19questions here

4free pages

6concepts

Questions 11–15

11expert · hard
A service provider is migrating a customer from a legacy VPN to a new MPLS L3VPN. The customer has overlapping IP addresses with another customer. The engineer must ensure that both customers can use the same IP ranges without conflict. Which configuration is required?
Select an answer first
12expert · hard
A network engineer is troubleshooting a RIB group that is not importing routes as expected. The engineer has verified the configuration and the import policy. Which additional check should be performed to diagnose the issue?
Select an answer first
13application · medium
An engineer is configuring a RIB group to import routes from the master routing table into a VRF instance. The engineer wants to control which routes are imported using a policy. Which configuration element is required to apply the policy to the RIB group?
Select an answer first
14application · medium
A network engineer is troubleshooting a routing issue in a VRF instance. The VRF has a route to 10.0.0.0/8 via next-hop 192.168.1.1, but the next-hop is not reachable in the VRF's routing table. What is the most likely result?
Select an answer first
15application · medium
A network administrator is configuring a VRF instance and needs to ensure that routes from the master routing table are available for next-hop resolution within the VRF. What should be configured?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-364

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-364” is a trademark of its owner, used for identification only.