What is the primary advantage of per-flow load balancing over per-packet load balancing?

It maintains packet ordering within a flow

It provides better bandwidth utilization

What is the effect of configuring 'load-balance per-packet' under [edit routing-options]?

It enables load balancing for all protocols that have equal-cost paths

It requires a routing policy to take effect

It disables load balancing for all protocols

A network operator is troubleshooting a performance issue where a single TCP flow is not utilizing the full bandwidth of two equal-cost links. The router is configured with per-flow load balancing. What is the most likely reason the single flow is limited to one link's bandwidth?

The router is configured with per-packet load balancing.

The two links have different MTU sizes.

The router is using a single next-hop due to a routing protocol issue.

Per-flow load balancing intentionally pins a flow to one path.

After configuring load balancing on a Junos router, an engineer wants to verify that the forwarding table is using both next-hops. Which command provides the most direct confirmation of the forwarding behavior?

show route forwarding-table destination-prefix

Which Junos configuration statement enables load balancing for a routing protocol?

set interfaces ge-0/0/0 load-balance

set protocols ospf load-balance per-packet

set routing-options load-balance per-packet

set policy-options load-balance per-flow

Juniper NetworksCertified Specialist, Service Provider Routing and Switching (JNCIS-SP)

Domain 1Objective 4

Load Balancing JN0-364 Practice Questions (Page 2)

Part of the Protocol-Independent Routing domain, which makes up ~7% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~2–4 in this domain), expect 1–1 from this objective — we provide 18 practice questions to prepare you well beyond it. (estimate)

18questions here

4free pages

5concepts

Questions 6–10

6foundation · easy
What is the primary advantage of per-flow load balancing over per-packet load balancing?
Select an answer first
7foundation · easy
What is the effect of configuring 'load-balance per-packet' under [edit routing-options]?
Select an answer first
8application · medium
A network operator is troubleshooting a performance issue where a single TCP flow is not utilizing the full bandwidth of two equal-cost links. The router is configured with per-flow load balancing. What is the most likely reason the single flow is limited to one link's bandwidth?
Select an answer first
9application · medium
After configuring load balancing on a Junos router, an engineer wants to verify that the forwarding table is using both next-hops. Which command provides the most direct confirmation of the forwarding behavior?
Select an answer first
10foundation · easy
Which Junos configuration statement enables load balancing for a routing protocol?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-364

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-364” is a trademark of its owner, used for identification only.