You are troubleshooting an OSPFv3 adjacency issue between two Junos routers. The adjacency is stuck in the Loading state. What is the most likely cause?

The routers have a mismatch in the OSPFv3 area.

The routers have a mismatch in the OSPFv3 dead interval.

The routers are unable to exchange Link State Advertisements (LSAs).

The routers have a mismatch in the OSPFv3 router ID.

A network engineer is configuring OSPFv3 on a Junos router. The router has two interfaces: ge-0/0/0 and ge-0/0/1. The engineer wants to use the same IPv6 link-local address on both interfaces to conserve address space. What is the impact of this configuration?

OSPFv3 will form adjacencies on both interfaces, but the router ID will be the same.

OSPFv3 will form adjacencies on both interfaces, but the link-local address will be advertised as a global address.

OSPFv3 will not form adjacencies on either interface because the link-local addresses are the same.

OSPFv3 will form adjacencies on both interfaces, but the SPF calculation will be incorrect.

Juniper NetworksCertified Specialist, Service Provider Routing and Switching (JNCIS-SP)

Domain 8Objective 2

Dynamic Routing - OSPFv3, IS-IS, BGP JN0-364 Practice Questions (Page 4)

Part of the IPv6 domain, which makes up ~5% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~2–3 in this domain), expect 1–1 from this objective — we provide 18 practice questions to prepare you well beyond it. (estimate)

18questions here

4free pages

7concepts

Questions 16–18

16foundation · easy
Which authentication method is supported for OSPFv3 in Junos?
Select an answer first
17application · medium
You are troubleshooting an OSPFv3 adjacency issue between two Junos routers. The adjacency is stuck in the Loading state. What is the most likely cause?
Select an answer first
18expert · hard
A network engineer is configuring OSPFv3 on a Junos router. The router has two interfaces: ge-0/0/0 and ge-0/0/1. The engineer wants to use the same IPv6 link-local address on both interfaces to conserve address space. What is the impact of this configuration?
Select an answer first

Finished these 3 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to JN0-364

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-364” is a trademark of its owner, used for identification only.

Dynamic Routing - OSPFv3, IS-IS, BGP JN0-364 Practice Questions (Page 4)

Questions 16–18

Which authentication method is supported for OSPFv3 in Junos?

You are troubleshooting an OSPFv3 adjacency issue between two Junos routers. The adjacency is stuck in the Loading state. What is the most likely cause?

A network engineer is configuring OSPFv3 on a Junos router. The router has two interfaces: ge-0/0/0 and ge-0/0/1. The engineer wants to use the same IPv6 link-local address on both interfaces to conserve address space. What is the impact of this configuration?

Keep studying — IPv6