Juniper NetworksCertified Specialist, Service Provider Routing and Switching (JNCIS-SP)
Domain 4Objective 1
BGP Basic Operation JN0-364 Practice Questions (Page 4)
Part of the Border Gateway Protocol (BGP) domain, which makes up ~10% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–6 in this domain), expect 1–1 from this objective — we provide 27 practice questions to prepare you well beyond it. (estimate)
27questions here
6free pages
10concepts
Questions 16–20
- 16
In the BGP finite state machine, which state is the initial state before any TCP connection is attempted?
Select an answer first - 17
A network engineer is analyzing BGP path selection for a prefix that has multiple routes. The routes have the same local preference, AS path length, origin type, and MED. The engineer wants to ensure that the route with the lowest router ID is preferred. What is the next criterion in the BGP path selection algorithm after MED?
Select an answer first - 18
A network administrator is configuring a new BGP session between two routers in different autonomous systems. The session is not coming up. The administrator verifies that both routers have the correct neighbor IP addresses and that TCP port 179 is reachable. The session state on the local router is stuck in Active. What is the most likely cause?
Select an answer first - 19
A network engineer is designing an iBGP network with a full mesh of sessions. The network uses OSPF as the IGP. The engineer is considering whether to enable the BGP synchronization rule. What is the correct recommendation?
Select an answer first - 20
In the BGP path selection algorithm, which attribute is compared first among the following?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-364” is a trademark of its owner, used for identification only.