A multi-homed customer connects to two different ISPs. The customer wants to influence inbound traffic from ISP A to prefer the link through ISP B. Which attribute should the customer set on routes advertised to ISP A to achieve this?

Set a lower MED on routes advertised to ISP A.

Set a higher MED on routes advertised to ISP A.

Set a lower MED on routes advertised to ISP B.

Set a higher local preference on routes advertised to ISP A.

Juniper NetworksCertified Specialist, Service Provider Routing and Switching (JNCIS-SP)

Domain 4Objective 3

Attributes JN0-364 Practice Questions (Page 1)

Part of the Border Gateway Protocol (BGP) domain, which makes up ~10% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–6 in this domain), expect 1–1 from this objective — we provide 23 practice questions to prepare you well beyond it. (estimate)

23questions here

5free pages

7concepts

Questions 1–5

1foundation · easy
Which pair of optional non-transitive BGP attributes is used by route reflectors to prevent routing loops?
Select an answer first
2foundation · easy
Which optional transitive BGP attribute is used to tag routes with a 32-bit value so that policies can be applied consistently across AS boundaries?
Select an answer first
3application · medium
A network administrator is configuring route aggregation on a BGP router. The administrator wants to ensure that the aggregated route includes information about the AS that performed the aggregation. Which attribute should be used for this purpose?
Select an answer first
4application · medium
A multi-homed customer connects to two different ISPs. The customer wants to influence inbound traffic from ISP A to prefer the link through ISP B. Which attribute should the customer set on routes advertised to ISP A to achieve this?
Select an answer first
5foundation · easy
Which optional transitive BGP attribute identifies the AS number and router ID of the router that performed route aggregation?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-364

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-364” is a trademark of its owner, used for identification only.

Attributes JN0-364 Practice Questions (Page 1)

Questions 1–5

Which pair of optional non-transitive BGP attributes is used by route reflectors to prevent routing loops?

Which optional transitive BGP attribute is used to tag routes with a 32-bit value so that policies can be applied consistently across AS boundaries?

A network administrator is configuring route aggregation on a BGP router. The administrator wants to ensure that the aggregated route includes information about the AS that performed the aggregation. Which attribute should be used for this purpose?

A multi-homed customer connects to two different ISPs. The customer wants to influence inbound traffic from ISP A to prefer the link through ISP B. Which attribute should the customer set on routes advertised to ISP A to achieve this?

Which optional transitive BGP attribute identifies the AS number and router ID of the router that performed route aggregation?

Keep studying — Border Gateway Protocol (BGP)