A network engineer is troubleshooting a convergence issue on a Juniper switch. The engineer runs 'show spanning-tree interface' and sees that a port is in the 'learning' state. What does this indicate?

The port is blocked and not forwarding traffic.

The port is not participating in RSTP.

The port is forwarding traffic and learning MAC addresses.

The port is transitioning from discarding to forwarding.

A network administrator is planning to deploy RSTP in a network with several Juniper switches. The administrator wants to ensure that RSTP is enabled globally on all switches. Which configuration is required?

set protocols rstp bridge-priority 4096

set protocols rstp interface ge-0/0/1

Which configuration statement changes the bridge priority of a Juniper switch to make it more likely to become the root bridge?

set interfaces ge-0/0/0 unit 0 family ethernet-switching rstp priority 4096

set protocols rstp bridge-priority 4096

set protocols rstp priority 4096

set protocols rstp root-bridge priority 4096

Juniper NetworksCertified Specialist, Enterprise Routing and Switching (JNCIS-ENT)

Domain 2Objective 6

Configure, Monitor, or Troubleshoot RSTP JN0-352 Practice Questions (Page 4)

Part of the Spanning Tree domain, which makes up ~11% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–7 in this domain), expect 1–1 from this objective — we provide 18 practice questions to prepare you well beyond it. (estimate)

18questions here

4free pages

6concepts

Questions 16–18

16expert · medium
A network engineer is troubleshooting a convergence issue on a Juniper switch. The engineer runs 'show spanning-tree interface' and sees that a port is in the 'learning' state. What does this indicate?
Select an answer first
17application · easy
A network administrator is planning to deploy RSTP in a network with several Juniper switches. The administrator wants to ensure that RSTP is enabled globally on all switches. Which configuration is required?
Select an answer first
18foundation · easy
Which configuration statement changes the bridge priority of a Juniper switch to make it more likely to become the root bridge?
Select an answer first

Finished these 3 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to JN0-352

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-352” is a trademark of its owner, used for identification only.

Configure, Monitor, or Troubleshoot RSTP JN0-352 Practice Questions (Page 4)

Questions 16–18

A network engineer is troubleshooting a convergence issue on a Juniper switch. The engineer runs 'show spanning-tree interface' and sees that a port is in the 'learning' state. What does this indicate?

A network administrator is planning to deploy RSTP in a network with several Juniper switches. The administrator wants to ensure that RSTP is enabled globally on all switches. Which configuration is required?

Which configuration statement changes the bridge priority of a Juniper switch to make it more likely to become the root bridge?

Keep studying — Spanning Tree