A network administrator is comparing RSTP and legacy STP to decide which to use in a network with redundant links. The administrator notes that RSTP provides faster convergence. What is the primary reason for this?

RSTP uses a shorter max age timer.

RSTP uses a shorter forward delay timer.

RSTP uses a shorter hello timer.

RSTP uses a proposal-agreement handshake to transition ports.

A network administrator suspects a Layer 2 loop is occurring on a network running RSTP. Which action is most likely to help identify the cause?

Reboot all switches to reset the spanning tree protocol

Disable RSTP on all switches to stop the loop

Increase the bridge priority on all switches to make them more likely to become the root bridge

Check the RSTP port roles and states using 'show spanning-tree interface' to see if any port is incorrectly forwarding

Juniper NetworksCertified Specialist, Enterprise Routing and Switching (JNCIS-ENT)

Domain 2Objective 6

Configure, Monitor, or Troubleshoot RSTP JN0-352 Practice Questions (Page 3)

Part of the Spanning Tree domain, which makes up ~11% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–7 in this domain), expect 1–1 from this objective — we provide 18 practice questions to prepare you well beyond it. (estimate)

18questions here

4free pages

6concepts

Questions 11–15

11foundation · easy
Which RSTP link type is automatically assumed on a full-duplex point-to-point link between two switches?
Select an answer first
12foundation · easy
Which RSTP port state is used for a port that is not forwarding frames but is still actively learning MAC addresses?
Select an answer first
13application · medium
A network administrator is comparing RSTP and legacy STP to decide which to use in a network with redundant links. The administrator notes that RSTP provides faster convergence. What is the primary reason for this?
Select an answer first
14application · easy
A network engineer is reviewing the RSTP port states on a Juniper switch. The engineer sees that a port is in the 'discarding' state. What is the role of this port?
Select an answer first
15foundation · easy
A network administrator suspects a Layer 2 loop is occurring on a network running RSTP. Which action is most likely to help identify the cause?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-352

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-352” is a trademark of its owner, used for identification only.

Configure, Monitor, or Troubleshoot RSTP JN0-352 Practice Questions (Page 3)

Questions 11–15

Which RSTP link type is automatically assumed on a full-duplex point-to-point link between two switches?

Which RSTP port state is used for a port that is not forwarding frames but is still actively learning MAC addresses?

A network administrator is comparing RSTP and legacy STP to decide which to use in a network with redundant links. The administrator notes that RSTP provides faster convergence. What is the primary reason for this?

A network engineer is reviewing the RSTP port states on a Juniper switch. The engineer sees that a port is in the 'discarding' state. What is the role of this port?

A network administrator suspects a Layer 2 loop is occurring on a network running RSTP. Which action is most likely to help identify the cause?

Keep studying — Spanning Tree