Juniper NetworksCertified Specialist, Enterprise Routing and Switching (JNCIS-ENT)
Domain 2Objective 5
Configure, Monitor, or Troubleshoot STP JN0-352 Practice Questions (Page 1)
Part of the Spanning Tree domain, which makes up ~11% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–7 in this domain), expect 1–1 from this objective — we provide 13 practice questions to prepare you well beyond it. (estimate)
13questions here
3free pages
4concepts
Questions 1–5
- 1
A Juniper EX switch is experiencing frequent STP topology changes. The administrator runs 'show spanning-tree statistics' and sees a high number of topology changes. The administrator suspects that a device is flapping on a port. Which command would help identify the specific interface causing the issue?
Select an answer first - 2
Which Junos configuration statement is used to set the STP bridge priority for a switch?
Select an answer first - 3
A switch is receiving BPDUs on a port that was configured as an edge port. What is the most likely result?
Select an answer first - 4
A network has two Juniper EX switches connected via a single link. The administrator notices that the link is flapping, causing STP to constantly reconverge. The administrator suspects that the issue is caused by a faulty cable. Which action would help confirm this diagnosis?
Select an answer first - 5
Which Junos operational command shows the number of STP topology changes that have occurred?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-352” is a trademark of its owner, used for identification only.