What determines the next-hop of a generated route?

The next-hop is determined by the routing policy

The next-hop is configured manually

The next-hop of the contributing route

The next-hop is always the discard interface

How does a generated route behave when the last contributing route is removed from the routing table?

The generated route remains active with a null next-hop

The generated route remains active and is advertised

The generated route is withdrawn from the routing table

The generated route becomes a static route

What is the purpose of the policy used in a generated route configuration?

To set the next-hop for the generated route

To modify the preference of the generated route

To define which routes are considered contributing routes for the generated route

To advertise the generated route to specific neighbors

Which Junos feature can be used to provide fast failover for a static route by detecting next-hop reachability?

Bidirectional Forwarding Detection (BFD)

Graceful Routing Engine switchover (GRES)

You have configured an aggregate route for 10.0.0.0/8. The routing table currently contains the route 10.1.0.0/16. What is the state of the aggregate route?

Active, but only if the contributing route is learned via a dynamic protocol.

Active, because a contributing route exists.

Inactive, because the aggregate route is not advertised to any protocol.

Inactive, because the aggregate route is not explicitly configured with a next hop.

Juniper NetworksCertified Specialist, Enterprise Routing and Switching (JNCIS-ENT)

Domain 4Objective 1

Static, Aggregate, and Generated Routes JN0-352 Practice Questions (Page 1)

Part of the Protocol Independent Routing domain, which makes up ~10% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~4–6 in this domain), expect 1–1 from this objective — we provide 15 practice questions to prepare you well beyond it. (estimate)

15questions here

3free pages

9concepts

Questions 1–5

1foundation · easy
What determines the next-hop of a generated route?
Select an answer first
2foundation · easy
How does a generated route behave when the last contributing route is removed from the routing table?
Select an answer first
3foundation · easy
What is the purpose of the policy used in a generated route configuration?
Select an answer first
4foundation · easy
Which Junos feature can be used to provide fast failover for a static route by detecting next-hop reachability?
Select an answer first
5application · medium
You have configured an aggregate route for 10.0.0.0/8. The routing table currently contains the route 10.1.0.0/16. What is the state of the aggregate route?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-352

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-352” is a trademark of its owner, used for identification only.