A BGP router receives an UPDATE message that contains an invalid next-hop attribute. What is the correct response from the receiving router?

Send a KEEPALIVE message to acknowledge the UPDATE

Send a NOTIFICATION message with error code UPDATE Message Error

Ignore the UPDATE and continue the session

Accept the UPDATE and set the next-hop to 0.0.0.0

A BGP router is configured with a hold time of 0. The peer is configured with a hold time of 120 seconds. What is the negotiated hold time for the session?

The session fails to establish because the hold times differ

What is the purpose of the Capabilities field in the BGP OPEN message?

To list the IP addresses of all BGP peers

To set the hold timer value for the session

To specify the maximum number of routes the peer can receive

To negotiate optional features such as multiprotocol extensions and route refresh

A network engineer is configuring a new BGP session between two routers. During the session establishment, the engineer notices that the routers exchange OPEN messages and then immediately exchange KEEPALIVE messages. What is the primary purpose of the KEEPALIVE messages in this context?

To negotiate the hold time and BGP version for the session

To advertise the initial set of routes to the peer

To request a re-transmission of the OPEN message if it was lost

To confirm that the OPEN messages were accepted and the session is established

Juniper NetworksCertified Specialist, Enterprise Routing and Switching (JNCIS-ENT)

Domain 7Objective 2

BGP Message Types JN0-352 Practice Questions (Page 3)

Part of the BGP domain, which makes up ~13% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–8 in this domain), expect 1–1 from this objective — we provide 24 practice questions to prepare you well beyond it. (estimate)

24questions here

5free pages

5concepts

Questions 11–15

11application · medium
A BGP router receives an UPDATE message that contains an invalid next-hop attribute. What is the correct response from the receiving router?
Select an answer first
12expert · hard
A BGP router is configured with a hold time of 0. The peer is configured with a hold time of 120 seconds. What is the negotiated hold time for the session?
Select an answer first
13foundation · easy
What is the purpose of the Capabilities field in the BGP OPEN message?
Select an answer first
14foundation · easy
What information is included in a BGP NOTIFICATION message to help diagnose the cause of the error?
Select an answer first
15application · medium
A network engineer is configuring a new BGP session between two routers. During the session establishment, the engineer notices that the routers exchange OPEN messages and then immediately exchange KEEPALIVE messages. What is the primary purpose of the KEEPALIVE messages in this context?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-352

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-352” is a trademark of its owner, used for identification only.