Route/path Selection Process JN0-352 Practice Questions (Page 1)

Questions 1–5

1. 1foundation · easy

   Two BGP routes for the same prefix have identical attributes up to the eBGP/iBGP preference step. What is compared next in the path selection process?

   • APeer IP address
   • BIGP metric to the next hop
   • CMED
   • DRouter ID
   Reveal Solution Discussion Select an answer first
2. 2foundation · easy

   Which BGP attribute is evaluated FIRST when a Junos device selects the best route among multiple candidates for the same prefix?

   • ALocal preference
   • BRouter ID
   • CAS path length
   • DMED
   Reveal Solution Discussion Select an answer first
4. 3foundation · easy

   A network administrator wants to influence outbound traffic from their AS to prefer a specific eBGP peer. Which BGP attribute should be modified on routes received from that peer?

   • AAS path prepend
   • BLocal preference
   • COrigin code
   • DMED
   Reveal Solution Discussion Select an answer first
5. 4foundation · easy

   Two BGP routes have identical attributes, including the same router ID for their respective peers. What is the FINAL tie-breaker in BGP path selection?

   • AThe lowest local preference
   • BThe shortest AS path
   • CThe lowest peer IP address
   • DThe highest peer IP address
   Reveal Solution Discussion Select an answer first
6. 5application · medium

   Your AS 65000 has two eBGP connections to the same upstream provider AS 64500. You want the upstream provider to prefer the link through your router R1 for traffic destined to your network 203.0.113.0/24. What should you configure on R1?

   • ASet origin to Incomplete on the route advertised via R1
   • BSet local preference to 200 on routes received from the upstream via R1
   • CSet AS path prepend to add 65000 twice on the route advertised via R1
   • DSet MED to 50 on the route advertised to the upstream via R1
   Reveal Solution Discussion Select an answer first