You need to verify that a BGP group is configured correctly and that all peers in the group are in the Established state. Which command shows the state of all peers in a specific group?

show configuration protocols bgp group group-name

You need to check the number of routes that have been received from a specific BGP peer. Which command provides this information?

show route advertising-protocol bgp 192.0.2.1

show route receive-protocol bgp 192.0.2.1

A BGP peer is in the Active state and not establishing. The group has a local address of 192.0.2.1, but the peer is on a different subnet. You have verified that the peer is reachable via the network. What is the most likely cause?

The local address is not reachable from the peer.

The peer is configured with a different hold time.

The peer is not configured in the group.

The export policy is rejecting all routes.

In Junos OS, how do you configure a specific BGP peer within a group?

Create a new group for each peer.

Add a neighbor statement under the group with the peer's IP address.

Configure the peer under the routing-options hierarchy.

Use the set protocols bgp peer command.

Juniper NetworksCertified Specialist, Enterprise Routing and Switching (JNCIS-ENT)

Domain 7Objective 6

Configure, Monitor, or Troubleshoot BGP Groups and Peers JN0-352 Practice Questions (Page 1)

Part of the BGP domain, which makes up ~13% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–8 in this domain), expect 1–1 from this objective — we provide 19 practice questions to prepare you well beyond it. (estimate)

19questions here

4free pages

4concepts

Questions 1–5

1application · medium
You need to verify that a BGP group is configured correctly and that all peers in the group are in the Established state. Which command shows the state of all peers in a specific group?
Select an answer first
2foundation · easy
Which configuration statement is used to define a BGP group in Junos OS?
Select an answer first
3application · medium
You need to check the number of routes that have been received from a specific BGP peer. Which command provides this information?
Select an answer first
4expert · hard
A BGP peer is in the Active state and not establishing. The group has a local address of 192.0.2.1, but the peer is on a different subnet. You have verified that the peer is reachable via the network. What is the most likely cause?
Select an answer first
5foundation · easy
In Junos OS, how do you configure a specific BGP peer within a group?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-352

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-352” is a trademark of its owner, used for identification only.