You have a Junos router with an OSPF-learned route to 10.10.10.0/24 and a BGP-learned route to the same prefix. You want the BGP route to be preferred without changing the preference for all BGP routes. What should you configure?

Set the OSPF preference to 200 globally

Use the 'metric' statement under the BGP group

Change the BGP metric to a lower value

Apply a routing policy that sets the BGP route's preference to 5

In Junos, what is the purpose of route preference?

To determine the best route to a destination when multiple routing protocols provide routes

To determine the bandwidth of the interface used by a route

To determine the cost of a route within a single routing protocol

To determine the physical distance to a destination in kilometers

Juniper NetworksCertified Associate, Junos

Domain 6Objective 3

Route Preference JN0-105 Practice Questions (Page 3)

Part of the Routing Fundamentals domain, which makes up ~13% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–8 in this domain), expect 1–1 from this objective — we provide 12 practice questions to prepare you well beyond it. (estimate)

12questions here

3free pages

6concepts

Questions 11–12

11application · medium
You have a Junos router with an OSPF-learned route to 10.10.10.0/24 and a BGP-learned route to the same prefix. You want the BGP route to be preferred without changing the preference for all BGP routes. What should you configure?
Select an answer first
12foundation · easy
In Junos, what is the purpose of route preference?
Select an answer first

Finished these 2 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to JN0-105

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-105” is a trademark of its owner, used for identification only.

Route Preference JN0-105 Practice Questions (Page 3)

Questions 11–12

You have a Junos router with an OSPF-learned route to 10.10.10.0/24 and a BGP-learned route to the same prefix. You want the BGP route to be preferred without changing the preference for all BGP routes. What should you configure?

In Junos, what is the purpose of route preference?

Keep studying — Routing Fundamentals