Juniper NetworksCertified Associate, Junos
Domain 6Objective 5
Static Routing JN0-105 Practice Questions (Page 1)
Part of the Routing Fundamentals domain, which makes up ~13% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–8 in this domain), expect 1–1 from this objective — we provide 13 practice questions to prepare you well beyond it. (estimate)
13questions here
3free pages
6concepts
Questions 1–5
- 1
A network engineer is troubleshooting a routing issue where a static route to 10.0.0.0/8 is not being used even though it is configured. The router also has an OSPF route to 10.0.0.0/8 with a preference of 10. The static route has a preference of 5. What is the most likely reason the static route is not active?
Select an answer first - 2
Which static route next-hop type is used to send packets to a specific IP address that may not be directly connected?
Select an answer first - 3
Which scenario requires recursive next-hop resolution for a static route?
Select an answer first - 4
A network engineer wants to configure a static route to a destination network that should silently drop any traffic destined to it. The route should be installed in the routing table but not forward traffic to any next-hop. Which next-hop type should be used?
Select an answer first - 5
Which command would you use to view the configured static routes along with their preference values?
Select an answer first
Finished these 5 questions?
Review the revealed explanations, or continue through the curriculum.
Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-105” is a trademark of its owner, used for identification only.