A Junos device has a static route with preference 5 and a BGP route with preference 170 to the same destination. Which route will be installed in the forwarding table?

Both routes, because they have different preferences

The static route, because it has a lower preference

The BGP route, because BGP is more scalable

Neither route, because they are from different protocols

You are reviewing the routing table on a Junos device. You see a route to 172.20.0.0/16 learned via RIP and another via a static route. Which route will be preferred?

The route with the higher metric is preferred

The RIP route, because its preference is lower

Both routes are installed, and traffic is load-balanced

The static route, because its preference is lower

You want to change the preference for all OSPF routes on a Junos device. Which configuration hierarchy would you use?

set protocols ospf preference 25

set protocols ospf route-preference 25

set routing-options preference ospf 25

Juniper NetworksCertified Associate, Junos

Domain 6Objective 3

Route Preference JN0-105 Practice Questions (Page 1)

Part of the Routing Fundamentals domain, which makes up ~13% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–8 in this domain), expect 1–1 from this objective — we provide 12 practice questions to prepare you well beyond it. (estimate)

12questions here

3free pages

6concepts

Questions 1–5

1foundation · easy
A Junos device has a static route with preference 5 and a BGP route with preference 170 to the same destination. Which route will be installed in the forwarding table?
Select an answer first
2expert · hard
You have a Junos router with a static route to 10.1.0.0/16 and an OSPF route to the same prefix. You want the OSPF route to be preferred, but you cannot change the static route's configuration. What is the minimum preference value you can set for OSPF to achieve this?
Select an answer first
3foundation · easy
In Junos, when two OSPF routes exist to the same destination, which value is used to select the best route?
Select an answer first
4application · medium
You are reviewing the routing table on a Junos device. You see a route to 172.20.0.0/16 learned via RIP and another via a static route. Which route will be preferred?
Select an answer first
5foundation · easy
You want to change the preference for all OSPF routes on a Junos device. Which configuration hierarchy would you use?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-105

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-105” is a trademark of its owner, used for identification only.

Route Preference JN0-105 Practice Questions (Page 1)

Questions 1–5

A Junos device has a static route with preference 5 and a BGP route with preference 170 to the same destination. Which route will be installed in the forwarding table?

You have a Junos router with a static route to 10.1.0.0/16 and an OSPF route to the same prefix. You want the OSPF route to be preferred, but you cannot change the static route's configuration. What is the minimum preference value you can set for OSPF to achieve this?

In Junos, when two OSPF routes exist to the same destination, which value is used to select the best route?

You are reviewing the routing table on a Junos device. You see a route to 172.20.0.0/16 learned via RIP and another via a static route. Which route will be preferred?

You want to change the preference for all OSPF routes on a Junos device. Which configuration hierarchy would you use?

Keep studying — Routing Fundamentals