A Junos device has two routes to 172.16.0.0/16: one from OSPF with a metric of 50 and one from RIP with a metric of 3. Which route will be installed in the routing table?

Both routes are installed, and traffic is load-balanced

The route with the highest preference is installed

The OSPF route, because its preference is lower

The RIP route, because its metric is lower

A Junos device has routes to 192.168.10.0/24 from OSPF, IS-IS, and BGP. All routes have the same metric. Which route will be installed in the routing table?

All three routes are installed, and load balancing occurs

The IS-IS route, because its preference is the lowest

The OSPF route, because its preference is the lowest

The BGP route, because its preference is the lowest

A Junos device has a static route with preference 5 and an OSPF route with preference 10 to the same destination. Which route will be used?

The static route, because it has a lower preference value

The OSPF route, because it has a higher preference value

Both routes will be used for load balancing

The OSPF route, because OSPF is a dynamic protocol

You are troubleshooting a routing issue on a Junos device. The routing table shows a route to 10.0.0.0/8 learned via OSPF and another via IS-IS. Both routes have the same metric. Which route will be preferred?

Both routes are installed, and traffic is load-balanced

The OSPF route, because its default preference is lower

The IS-IS route, because its default preference is lower

The route with the higher metric is preferred

Juniper NetworksCertified Associate, Junos

Domain 6Objective 3

Route Preference JN0-105 Practice Questions (Page 2)

Part of the Routing Fundamentals domain, which makes up ~13% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–8 in this domain), expect 1–1 from this objective — we provide 12 practice questions to prepare you well beyond it. (estimate)

12questions here

3free pages

6concepts

Questions 6–10

6application · medium
A Junos device has two routes to 172.16.0.0/16: one from OSPF with a metric of 50 and one from RIP with a metric of 3. Which route will be installed in the routing table?
Select an answer first
7foundation · easy
Which routing protocol has the default route preference of 170 in Junos?
Select an answer first
8application · medium
A Junos device has routes to 192.168.10.0/24 from OSPF, IS-IS, and BGP. All routes have the same metric. Which route will be installed in the routing table?
Select an answer first
9foundation · easy
A Junos device has a static route with preference 5 and an OSPF route with preference 10 to the same destination. Which route will be used?
Select an answer first
10application · medium
You are troubleshooting a routing issue on a Junos device. The routing table shows a route to 10.0.0.0/8 learned via OSPF and another via IS-IS. Both routes have the same metric. Which route will be preferred?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-105

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-105” is a trademark of its owner, used for identification only.