What is recursive next-hop resolution in the context of static routes?

The router sends the packet to the next-hop without any additional lookups.

The router uses the destination prefix to find the next-hop.

The router uses the metric to determine the next-hop.

The router looks up the next-hop address in the routing table to determine the outgoing interface.

Which operational command displays the static routes configured on a Junos device?

show configuration routing-options static

Which statement correctly describes the purpose of the 'next-hop' statement in a Junos static route configuration?

It enables the route to be advertised to other routers.

It sets the administrative distance for the route.

It defines the destination network's subnet mask.

It specifies the IP address of the next router or the local interface through which the destination can be reached.

What is the purpose of a floating static route?

To provide a route with a lower preference than the primary route.

To provide a backup route that is used only when the primary route is unavailable.

To provide a route that is always preferred over dynamic routes.

To provide a route that is automatically advertised to other routers.

Juniper NetworksCertified Associate, Junos

Domain 6Objective 5

Static Routing JN0-105 Practice Questions (Page 2)

Part of the Routing Fundamentals domain, which makes up ~13% of our current practice bank. Juniper Networks does not publish an official question count, but from its 90-minute exam (~35–60 total, ~5–8 in this domain), expect 1–1 from this objective — we provide 13 practice questions to prepare you well beyond it. (estimate)

13questions here

3free pages

6concepts

Questions 6–10

6application · medium
A network engineer is configuring a floating static route for backup connectivity to a remote site. The primary route is learned via BGP with a preference of 170. What preference should be assigned to the backup static route to ensure it is only used when BGP is unavailable?
Select an answer first
7foundation · easy
What is recursive next-hop resolution in the context of static routes?
Select an answer first
8foundation · easy
Which operational command displays the static routes configured on a Junos device?
Select an answer first
9foundation · easy
Which statement correctly describes the purpose of the 'next-hop' statement in a Junos static route configuration?
Select an answer first
10foundation · easy
What is the purpose of a floating static route?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to JN0-105

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Juniper Networks. “JN0-105” is a trademark of its owner, used for identification only.