Configure and Verify the Operation of ZTP SONIC-DEPLOY Practice Questions (Page 1)

Questions 1–5

1. 1application · medium

   After a ZTP process completes on a Dell SONiC switch, an administrator notices that the running configuration does not match the intended configuration file on the provisioning server. What is the most likely cause?

   • AThe switch's ZTP process failed silently.
   • BThe switch's management interface was down during provisioning.
   • CThe configuration file on the provisioning server was not correctly named or formatted.
   • DThe DHCP server provided the wrong IP address.
   Reveal Solution Discussion Select an answer first
2. 2application · medium

   A Dell SONiC switch is being deployed in a data center. The administrator wants to use ZTP, but the provisioning server is only reachable via a hostname that is not resolvable by the switch's DNS settings. What should the administrator do to ensure ZTP can reach the provisioning server?

   • AConfigure the provisioning server's IP address in DHCP option 66 instead of the hostname.
   • BDisable ZTP and configure the switch manually.
   • CUse a different provisioning server that is on the same subnet.
   • DConfigure DNS on the switch manually before ZTP runs.
   Reveal Solution Discussion Select an answer first
4. 3foundation · easy

   Which log file should you check to verify the operation of ZTP on a Dell SONiC switch?

   • A/var/log/messages
   • B/var/log/ztp.log
   • C/var/log/sonic.log
   • D/var/log/syslog
   Reveal Solution Discussion Select an answer first
5. 4application · medium

   A network engineer is deploying a Dell SONiC switch in a remote branch office. The switch is currently in factory-default state. The engineer needs the switch to automatically obtain a configuration from a provisioning server on the local management network without any manual intervention. The provisioning server is reachable via DHCP option 66. Which action should the engineer take to ensure ZTP runs on the switch?

   • ALeave the switch in factory-default state and power it on; ZTP will automatically attempt provisioning.
   • BManually configure the provisioning server IP in the startup configuration and reboot.
   • CEnable ZTP in the switch configuration and reboot the switch.
   • DDisable ZTP and use the DHCP server to push the full configuration directly.
   Reveal Solution Discussion Select an answer first
6. 5expert · hard

   A Dell SONiC switch failed ZTP, and the administrator is reviewing the logs. The logs show that the switch received DHCP option 66, but the HTTP request to the provisioning server timed out. The switch can ping the provisioning server's IP address. What is the most likely cause of the timeout?

   • AThe switch's management interface is down.
   • BThe DHCP server provided the wrong IP address for the provisioning server.
   • CThe provisioning server is not running an HTTP server on the expected port.
   • DThe configuration file is too large to download.
   Reveal Solution Discussion Select an answer first