A network engineer is configuring BGP EVPN on a Dell SONiC leaf switch. They have already configured the BGP neighbor and the EVPN address family. However, the EVPN routes are not being exchanged. What is the most likely missing configuration?

The IRB interface is not configured with an IP address.

The BGP neighbor is not activated under the EVPN address family.

The BGP router ID is not configured.

The VXLAN tunnel interface is not configured.

What is a characteristic of asymmetric IRB in a VXLAN EVPN fabric?

Routing is performed on the egress VTEP only

Both bridging and routing occur on the same VTEP for a given traffic flow

Only bridging is performed on VTEPs

Routing is performed on a central gateway

In asymmetric IRB, if a remote MAC address is not learned, which command would you use to check if the EVPN route is present?

show bgp l2vpn evpn route type mac-ip

A network administrator is configuring asymmetric IRB on a Dell SONiC leaf switch. They have created VLAN 100 and VLAN 200, and they want to map them to VNIs 10100 and 10200 respectively. They also need to create IRB interfaces for both VLANs. Which configuration step is essential for the IRB interfaces to function correctly?

Set the IRB interface as a trunk port to allow multiple VLANs.

Assign an IP address to each IRB interface and ensure the VLAN is mapped to the correct VNI.

Enable BGP EVPN on the IRB interface.

Create a VXLAN tunnel interface and assign the IRB interface to it.

Dell SONiC Deploy

Domain 5Objective 3

Configure and Verify BGP EVPN with Asymmetric IRB SONIC-DEPLOY Practice Questions (Page 5)

Part of the VXLAN domain, which accounts for 16% of the SONIC-DEPLOY exam.

24questions here

5free pages

7concepts

16%of the exam

Questions 21–24

21application · medium
A network engineer is configuring BGP EVPN on a Dell SONiC leaf switch. They have already configured the BGP neighbor and the EVPN address family. However, the EVPN routes are not being exchanged. What is the most likely missing configuration?
Select an answer first
22foundation · easy
What is a characteristic of asymmetric IRB in a VXLAN EVPN fabric?
Select an answer first
23foundation · easy
In asymmetric IRB, if a remote MAC address is not learned, which command would you use to check if the EVPN route is present?
Select an answer first
24application · medium
A network administrator is configuring asymmetric IRB on a Dell SONiC leaf switch. They have created VLAN 100 and VLAN 200, and they want to map them to VNIs 10100 and 10200 respectively. They also need to create IRB interfaces for both VLANs. Which configuration step is essential for the IRB interfaces to function correctly?
Select an answer first

Finished these 4 questions?

Review the revealed explanations, or continue through the curriculum.

No more pagesBack to SONIC-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “SONIC-DEPLOY” is a trademark of its owner, used for identification only.

Configure and Verify BGP EVPN with Asymmetric IRB SONIC-DEPLOY Practice Questions (Page 5)

Questions 21–24

A network engineer is configuring BGP EVPN on a Dell SONiC leaf switch. They have already configured the BGP neighbor and the EVPN address family. However, the EVPN routes are not being exchanged. What is the most likely missing configuration?

What is a characteristic of asymmetric IRB in a VXLAN EVPN fabric?

In asymmetric IRB, if a remote MAC address is not learned, which command would you use to check if the EVPN route is present?

Keep studying — VXLAN