A network engineer is troubleshooting an OSPF issue where a router is not learning routes from a neighbor. The engineer verifies that the interfaces are up and OSPF is enabled. What should the engineer check next?

Whether the router has a default route configured

Whether the OSPF neighbor adjacency has formed

Whether the router's clock is synchronized

Whether the router's hostname is correct

A company is deploying OSPF in a campus network that spans two buildings. Building A has 30 routers, and Building B has 20 routers. The two buildings are connected by a single high-speed link. The network team wants to minimize the impact of a link failure in Building B on the routers in Building A. Which OSPF design should they use?

Increase the OSPF hello timer on the inter-building link.

Place all routers in a single OSPF area.

Use OSPF authentication on all links.

Place Building A routers in area 0 and Building B routers in area 1.

A network administrator is planning to deploy OSPF in a campus network that has multiple redundant paths between buildings. The administrator wants to ensure that traffic uses the path with the lowest cumulative cost. Which OSPF mechanism determines the best path?

The Shortest Path First (SPF) algorithm using the link-state database

The election of a designated router on each segment

The Bellman-Ford algorithm using distance vectors

Dell PowerSwitch Campus Deploy

Domain 4Objective 3

Identify the Components and Use Cases of Open Shortest Path First (OSPF) POWERSWITCH-CAMPUS-DEPLOY Practice Questions (Page 2)

Part of the IP Routing domain, which accounts for 20% of the POWERSWITCH-CAMPUS-DEPLOY exam.

18questions here

4free pages

3concepts

20%of the exam

Questions 6–10

6application · medium
A network engineer is troubleshooting an OSPF issue where a router is not learning routes from a neighbor. The engineer verifies that the interfaces are up and OSPF is enabled. What should the engineer check next?
Select an answer first
7expert · hard
A company is deploying OSPF in a campus network that spans two buildings. Building A has 30 routers, and Building B has 20 routers. The two buildings are connected by a single high-speed link. The network team wants to minimize the impact of a link failure in Building B on the routers in Building A. Which OSPF design should they use?
Select an answer first
8application · medium
A company is designing a new campus network with 50 routers. They need a routing protocol that can scale by dividing the network into smaller sections to reduce the impact of topology changes. Which OSPF feature directly supports this requirement?
Select an answer first
9application · medium
A network administrator is planning to deploy OSPF in a campus network that has multiple redundant paths between buildings. The administrator wants to ensure that traffic uses the path with the lowest cumulative cost. Which OSPF mechanism determines the best path?
Select an answer first
10expert · hard
An OSPF network has multiple areas. A router in area 1 needs to reach a network that is external to the OSPF domain. The external route is injected by an ASBR in area 0. Which LSA type will the router in area 1 receive to learn about this external route?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERSWITCH-CAMPUS-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERSWITCH-CAMPUS-DEPLOY” is a trademark of its owner, used for identification only.

Identify the Components and Use Cases of Open Shortest Path First (OSPF) POWERSWITCH-CAMPUS-DEPLOY Practice Questions (Page 2)

Questions 6–10

A network engineer is troubleshooting an OSPF issue where a router is not learning routes from a neighbor. The engineer verifies that the interfaces are up and OSPF is enabled. What should the engineer check next?

A company is designing a new campus network with 50 routers. They need a routing protocol that can scale by dividing the network into smaller sections to reduce the impact of topology changes. Which OSPF feature directly supports this requirement?

A network administrator is planning to deploy OSPF in a campus network that has multiple redundant paths between buildings. The administrator wants to ensure that traffic uses the path with the lowest cumulative cost. Which OSPF mechanism determines the best path?

An OSPF network has multiple areas. A router in area 1 needs to reach a network that is external to the OSPF domain. The external route is injected by an ASBR in area 0. Which LSA type will the router in area 1 receive to learn about this external route?

Keep studying — IP Routing