How does the PowerMax 8500 component layout differ from the PowerMax 2500 in terms of power supplies?

The 8500 has more power supplies and a more modular power distribution layout.

Both models have the same number of power supplies.

The 8500 has redundant power supplies, while the 2500 does not.

The 8500 has fewer power supplies than the 2500.

A technician is performing a health check on a PowerMax 2500 and needs to verify the status of the cooling fans. Where should the technician look to visually inspect the fan status LEDs?

On the rear panel, near the power supplies

On the top of the chassis, on the fan modules

On the midplane, visible through a service window

On the front bezel of the chassis

Dell PowerMax Install

Domain 2Objective 3

Locate PowerMax 2500 and 8500 Hardware Components POWERMAX-INSTALL Practice Questions (Page 3)

Part of the PowerMaxOS 10 Hardware Concepts domain, which accounts for 17% of the POWERMAX-INSTALL exam.

19questions here

4free pages

5concepts

17%of the exam

Questions 11–15

11foundation · easy
In the PowerMax 8500 chassis, where are the drive bays typically located?
Select an answer first
12foundation · easy
How does the PowerMax 8500 component layout differ from the PowerMax 2500 in terms of power supplies?
Select an answer first
13application · medium
An engineer is documenting the field-replaceable units (FRUs) of a PowerMax 8500 for a maintenance procedure. The engineer needs to identify which component is NOT typically considered a customer-replaceable FRU on the 8500. Which component should the engineer exclude from the FRU list?
Select an answer first
14application · easy
A technician is performing a health check on a PowerMax 2500 and needs to verify the status of the cooling fans. Where should the technician look to visually inspect the fan status LEDs?
Select an answer first
15application · easy
A data center technician is racking a PowerMax 2500 and needs to ensure proper airflow. The technician notices that the front bezel is solid and the rear of the chassis has vents. Which airflow direction should the technician expect?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWERMAX-INSTALL

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWERMAX-INSTALL” is a trademark of its owner, used for identification only.

Locate PowerMax 2500 and 8500 Hardware Components POWERMAX-INSTALL Practice Questions (Page 3)

Questions 11–15

In the PowerMax 8500 chassis, where are the drive bays typically located?

How does the PowerMax 8500 component layout differ from the PowerMax 2500 in terms of power supplies?

An engineer is documenting the field-replaceable units (FRUs) of a PowerMax 8500 for a maintenance procedure. The engineer needs to identify which component is NOT typically considered a customer-replaceable FRU on the 8500. Which component should the engineer exclude from the FRU list?

A technician is performing a health check on a PowerMax 2500 and needs to verify the status of the cooling fans. Where should the technician look to visually inspect the fan status LEDs?

A data center technician is racking a PowerMax 2500 and needs to ensure proper airflow. The technician notices that the front bezel is solid and the rear of the chassis has vents. Which airflow direction should the technician expect?

Keep studying — PowerMaxOS 10 Hardware Concepts