Locate PowerMax 2500 and 8500 Hardware Components POWERMAX-INSTALL Practice Questions (Page 1)

Questions 1–5

1. 1expert · hard

   A storage architect is evaluating the physical serviceability of the PowerMax 2500 and 8500 for a customer with a strict requirement: all routine maintenance must be performable without accessing the top of the rack. The customer expects to replace drives, fans, and I/O modules regularly. Which model meets this requirement?

   • APowerMax 2500, because its fans are top-mounted but drives and I/O are accessible from front and rear
   • BPowerMax 8500, because its fans are rear-mounted but drives are front-accessible
   • CPowerMax 8500, because all FRUs are accessible from the front or rear
   • DPowerMax 2500, because its drives and I/O modules are front and rear accessible
   Reveal Solution Discussion Select an answer first
2. 2foundation · easy

   Which of the following is a key difference in component layout between the PowerMax 2500 and 8500?

   • AThe PowerMax 2500 has a single chassis, while the 8500 uses multiple racks.
   • BThe PowerMax 8500 has a single chassis, while the 2500 uses multiple racks.
   • CBoth models have identical component layouts.
   • DThe PowerMax 2500 uses only external storage bays, while the 8500 uses only internal bays.
   Reveal Solution Discussion Select an answer first
4. 3foundation · easy

   In the PowerMax 2500 chassis, where are the power supplies typically located?

   • AAt the front of the chassis
   • BAt the rear of the chassis
   • COn the top of the chassis
   • DIn the middle of the chassis
   Reveal Solution Discussion Select an answer first
5. 4application · easy

   A technician is installing a PowerMax 2500 and needs to connect the network cables to the I/O modules. The technician is standing at the rear of the chassis. Where should the technician look for the I/O module ports?

   • AIn the upper rear section, above the power supplies
   • BOn the top of the chassis, near the fans
   • CIn the front of the chassis, behind the drive bezel
   • DIn the lower rear section, below the power supplies
   Reveal Solution Discussion Select an answer first
6. 5expert · hard

   A data center is being designed with a cold aisle on the front and a hot aisle on the rear. The storage team must choose between a PowerMax 2500 and 8500. The team has a constraint: the hot aisle has limited depth for rear service, but the cold aisle has ample space. Which model and configuration best accommodates this constraint?

   • APowerMax 2500, because all serviceable components are front-accessible
   • BPowerMax 8500, because its rear service is concentrated for power and I/O, while drives are front-accessible
   • CPowerMax 8500, because all serviceable components are rear-accessible
   • DPowerMax 2500, because its top-mounted fans reduce the need for rear service
   Reveal Solution Discussion Select an answer first