In which scenario would you choose Ethernet fabric mode over unified mode?

When you need to connect to a Fibre Channel storage array

When you need to reduce the number of cables by using FCoE

When all traffic is IP-based and no FC storage is required

When you want to use the same fabric for both LAN and SAN

An administrator is setting up a SmartFabric on an MX7000 and has completed the initial configuration. They want to ensure that the fabric is functioning correctly before deploying production workloads. What is the recommended next step in the SmartFabric configuration workflow?

Reboot the MX7000 chassis to apply the configuration

Disable monitoring to reduce overhead

Validate the fabric configuration and check for any errors or alerts

Immediately deploy production workloads

What is the primary purpose of Dell SmartFabric in the context of the PowerEdge MX7000 chassis?

To provide a centralized management interface for all servers in a data center

To replace the need for physical switches by using software-defined networking exclusively

To automate and simplify the deployment and management of the network fabric for compute sleds

To provide a backup and recovery solution for the MX7000 chassis configuration

How does SmartFabric integrate with the MX7000 chassis management?

It is configured directly on each compute sled

It runs as a service within OpenManage Enterprise Modular

It uses iDRAC to manage the network switches

It requires a separate physical appliance to manage the fabric

Which management interface is used to configure and monitor the SmartFabric in an MX7000 environment?

OpenManage Enterprise Modular (OMEM)

Dell PowerEdge MX Modular Deploy

Domain 4Objective 5

Understand the SmartFabric Architecture POWEREDGE-MX-MODULAR-DEPLOY Practice Questions (Page 6)

Part of the MX7000 Implementation domain, which accounts for 19% of the POWEREDGE-MX-MODULAR-DEPLOY exam.

34questions here

7free pages

7concepts

19%of the exam

Questions 26–30

26foundation · easy
In which scenario would you choose Ethernet fabric mode over unified mode?
Select an answer first
27application · medium
An administrator is setting up a SmartFabric on an MX7000 and has completed the initial configuration. They want to ensure that the fabric is functioning correctly before deploying production workloads. What is the recommended next step in the SmartFabric configuration workflow?
Select an answer first
28foundation · easy
What is the primary purpose of Dell SmartFabric in the context of the PowerEdge MX7000 chassis?
Select an answer first
29foundation · easy
How does SmartFabric integrate with the MX7000 chassis management?
Select an answer first
30foundation · easy
Which management interface is used to configure and monitor the SmartFabric in an MX7000 environment?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-MX-MODULAR-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-MX-MODULAR-DEPLOY” is a trademark of its owner, used for identification only.