Which management interface is commonly used to monitor the status of a Fabric Expander Module (FEM) in an MX7000 chassis?

The operating system's device manager

The chassis management controller (CMC) web interface

The iDRAC interface of each compute sled

What is the primary purpose of configuring VLANs when integrating the Fabric Expander Module (FEM) with the in-chassis switch?

To enable the switch to route between different subnets

To increase the physical number of ports available on the switch

To provide power over Ethernet to connected devices

To segment network traffic and improve security and performance

A company is planning to update the firmware on their MX7000 chassis components. The administrator needs to ensure that the FEM firmware is compatible with the IOM firmware. What is the recommended approach for updating the FEM firmware?

Use the firmware update wizard in OME-M to update the FEM firmware

Update the FEM firmware by replacing the FEM hardware

Download the firmware to a USB drive and insert it into the FEM

Update the FEM firmware directly from the IOM CLI

A company is deploying a new MX7000 chassis with the latest compute sleds. The administrator has installed the FEMs and IOMs, but the IOMs are not recognizing the FEMs. The administrator has verified that the FEMs are properly seated and the IOMs are powered on. What should the administrator do next to resolve this issue?

Update the IOM firmware to the latest version

Configure a VLAN on the IOM to enable FEM discovery

Reboot the compute sleds to refresh the connection

Replace the FEMs with a different model

An administrator is physically installing a Fabric Expander Module into an MX7000 chassis. The chassis is currently powered on and running production workloads. Which installation step is required to ensure the FEM is correctly seated and recognized by the system?

Insert the FEM into an empty rear mid-bay and push until the release latch clicks

Install the FEM in the front compute sled bay and connect it to the mid-plane

Connect the FEM to the IOM using an external QSFP-DD cable before insertion

Power down the entire chassis before inserting the FEM

Dell PowerEdge MX Modular Deploy

Domain 4Objective 2

Implement the Fabric Expander Module with the In-Chassis Network Switch POWEREDGE-MX-MODULAR-DEPLOY Practice Questions (Page 3)

Part of the MX7000 Implementation domain, which accounts for 19% of the POWEREDGE-MX-MODULAR-DEPLOY exam.

30questions here

6free pages

7concepts

19%of the exam

Questions 11–15

11foundation · easy
Which management interface is commonly used to monitor the status of a Fabric Expander Module (FEM) in an MX7000 chassis?
Select an answer first
12foundation · easy
What is the primary purpose of configuring VLANs when integrating the Fabric Expander Module (FEM) with the in-chassis switch?
Select an answer first
13application · medium
A company is planning to update the firmware on their MX7000 chassis components. The administrator needs to ensure that the FEM firmware is compatible with the IOM firmware. What is the recommended approach for updating the FEM firmware?
Select an answer first
14application · medium
A company is deploying a new MX7000 chassis with the latest compute sleds. The administrator has installed the FEMs and IOMs, but the IOMs are not recognizing the FEMs. The administrator has verified that the FEMs are properly seated and the IOMs are powered on. What should the administrator do next to resolve this issue?
Select an answer first
15application · medium
An administrator is physically installing a Fabric Expander Module into an MX7000 chassis. The chassis is currently powered on and running production workloads. Which installation step is required to ensure the FEM is correctly seated and recognized by the system?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-MX-MODULAR-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-MX-MODULAR-DEPLOY” is a trademark of its owner, used for identification only.