Describe the Power-On Options POWEREDGE-MX-MODULAR-DEPLOY Practice Questions (Page 4)

Questions 16–20

1. 16application · medium

   An MX7000 chassis fails to power on. The power supply LEDs are green, but the management module LED is off. What is the most likely cause?

   • AThe compute sleds are not installed
   • BThe power supplies are not providing output power
   • CThe management module is not seated properly or is faulty
   • DThe chassis is in standby mode and the management module is intentionally off
   Reveal Solution Discussion Select an answer first
2. 17foundation · easy

   In the recommended power-on sequence for the MX7000, what should be powered on first?

   • AThe management modules
   • BThe compute sleds
   • CThe I/O modules
   • DThe power supplies
   Reveal Solution Discussion Select an answer first
4. 18application · medium

   A technician is connecting DC power to an MX7000 chassis. After wiring the power supply, the technician notices a spark when connecting the last wire. What should the technician do immediately?

   • ADisconnect the power and verify the wiring polarity and connections
   • BCheck the management module LEDs to see if the chassis is receiving power
   • CReplace the power supply with an AC version
   • DTighten the connection and continue with the power-on sequence
   Reveal Solution Discussion Select an answer first
5. 19foundation · easy

   Which power source options are supported for the Dell PowerEdge MX7000 chassis?

   • AAC and DC
   • BSolar and wind
   • CAC only
   • DDC only
   Reveal Solution Discussion Select an answer first
6. 20foundation · easy

   What is the expected behavior if POST completes successfully on the MX7000?

   • AThe system shuts down automatically
   • BThe system displays an error message
   • CThe system enters a recovery mode
   • DThe system continues to boot and becomes operational
   Reveal Solution Discussion Select an answer first