What is a prerequisite for the Right Control Panel auto-configuration to occur in an MX7000 chassis?

The administrator must manually initiate the auto-configuration from the LCD menu

The new Right Control Panel must be the same model as the original

The chassis must be powered off during the replacement

The chassis management controller must be operational and able to communicate with the new panel

A data center technician is configuring a new MX7000 chassis in a lab. The security policy requires that the LCD on the Left Control Panel be protected so that only authorized staff can change the chassis identity or view system information from the front panel. The technician has physical access to the chassis and is logged into the OME-Modular interface. What should the technician do to meet this requirement?

Navigate the Left Control Panel menu to the LCD PIN option and enter a new PIN using the panel buttons.

Use the iDRAC direct console on a connected server to set the chassis LCD PIN.

Disable the LCD from the OME-Modular settings, which removes the need for a PIN.

Use the OME-Modular web interface to set a chassis management password, which also protects the LCD.

A technician is replacing the Right Control Panel in an MX7000 chassis. The chassis is powered on and OME-Modular is healthy. After installing the new panel, the technician notices that the panel's status in OME-Modular is 'Ready'. What does this status indicate?

The panel is ready to be manually configured by the technician.

The panel is physically installed but has not yet received its configuration.

The panel is ready for a firmware update before it can be used.

The panel has been successfully auto-configured and is operational.

What is the correct procedure to change an existing LCD PIN on an MX7000 Left Control Panel?

Enter the current PIN, then provide and confirm the new PIN

Remove the Left Control Panel and reconnect it to reset the PIN

Access the LCD menu and select 'Reset PIN' without entering the old PIN

Use the chassis LCD to enter a default PIN provided by Dell

After replacing the Right Control Panel in an MX7000 chassis, a technician wants to confirm that the auto-configuration was successful. The chassis is powered on and OME-Modular is accessible. Which action provides the most direct confirmation?

Check the OME-Modular event log for a message indicating the Right Control Panel was configured.

Confirm that the chassis service tag is visible on the front bezel.

Verify that the chassis fans are spinning at normal speed.

Ensure that the Left Control Panel LCD is displaying the correct chassis name.

Dell PowerEdge MX Modular Deploy

Domain 5Objective 3

Describe the Left Control Panel LCD PIN Management And/or Right Control Panel Field Replacement Auto-Configuration POWEREDGE-MX-MODULAR-DEPLOY Practice Questions (Page 4)

Part of the MX7000 Troubleshooting domain, which accounts for 8% of the POWEREDGE-MX-MODULAR-DEPLOY exam.

24questions here

5free pages

6concepts

8%of the exam

Questions 16–20

16foundation · easy
What is a prerequisite for the Right Control Panel auto-configuration to occur in an MX7000 chassis?
Select an answer first
17application · medium
A data center technician is configuring a new MX7000 chassis in a lab. The security policy requires that the LCD on the Left Control Panel be protected so that only authorized staff can change the chassis identity or view system information from the front panel. The technician has physical access to the chassis and is logged into the OME-Modular interface. What should the technician do to meet this requirement?
Select an answer first
18application · easy
A technician is replacing the Right Control Panel in an MX7000 chassis. The chassis is powered on and OME-Modular is healthy. After installing the new panel, the technician notices that the panel's status in OME-Modular is 'Ready'. What does this status indicate?
Select an answer first
19foundation · easy
What is the correct procedure to change an existing LCD PIN on an MX7000 Left Control Panel?
Select an answer first
20application · medium
After replacing the Right Control Panel in an MX7000 chassis, a technician wants to confirm that the auto-configuration was successful. The chassis is powered on and OME-Modular is accessible. Which action provides the most direct confirmation?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-MX-MODULAR-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-MX-MODULAR-DEPLOY” is a trademark of its owner, used for identification only.