A technician is setting an LCD PIN for the first time on a new MX7000 chassis. The technician is at the Left Control Panel and has navigated to the LCD PIN menu. What is the next step in the process?

Enter a new PIN and confirm it by entering it a second time.

Enter the default PIN '0000' and then the new PIN.

Connect a USB keyboard to the Left Control Panel to type the new PIN.

Set the PIN via the OME-Modular web interface and then sync it to the panel.

Which statement best describes the function of the LCD PIN on the MX7000 Left Control Panel?

It allows remote administrators to control the chassis without network access

It locks the chassis power button to prevent accidental shutdowns

It provides an additional authentication factor for accessing the LCD menu and configuration options

It encrypts the communication between the Left Control Panel and the chassis management controller

A technician has just replaced the Right Control Panel in an MX7000 chassis. The chassis is running and OME-Modular is healthy. What is the most reliable way to confirm that the new Right Control Panel has been successfully auto-configured?

Check that the chassis power LED is green.

Check the chassis service tag on the front bezel.

Press the LCD buttons on the Left Control Panel to see if the Right Control Panel responds.

Verify the Right Control Panel status in OME-Modular and confirm it shows as 'Ready' or 'Online'.

An administrator has forgotten the LCD PIN on the Left Control Panel of an MX7000 chassis. The chassis is in a secure data center, and the administrator has physical access to the front panel. What is the required procedure to regain access to the LCD menu?

Reset the chassis via the OME-Modular GUI, which clears the LCD PIN.

Contact Dell Support and provide proof of ownership to obtain a recovery procedure or reset code.

Power cycle the chassis and hold the Select button to bypass the PIN.

Enter the default PIN '0000' to unlock the panel and then set a new one.

What happens when a Right Control Panel is replaced in an MX7000 chassis?

The administrator must manually configure the new panel via iDRAC

The chassis requires a full power cycle to recognize the new panel

The new panel remains non-functional until a firmware update is applied

The new panel automatically configures itself with the chassis settings

Dell PowerEdge MX Modular Deploy

Domain 5Objective 3

Describe the Left Control Panel LCD PIN Management And/or Right Control Panel Field Replacement Auto-Configuration POWEREDGE-MX-MODULAR-DEPLOY Practice Questions (Page 2)

Part of the MX7000 Troubleshooting domain, which accounts for 8% of the POWEREDGE-MX-MODULAR-DEPLOY exam.

24questions here

5free pages

6concepts

8%of the exam

Questions 6–10

6application · easy
A technician is setting an LCD PIN for the first time on a new MX7000 chassis. The technician is at the Left Control Panel and has navigated to the LCD PIN menu. What is the next step in the process?
Select an answer first
7foundation · easy
Which statement best describes the function of the LCD PIN on the MX7000 Left Control Panel?
Select an answer first
8application · medium
A technician has just replaced the Right Control Panel in an MX7000 chassis. The chassis is running and OME-Modular is healthy. What is the most reliable way to confirm that the new Right Control Panel has been successfully auto-configured?
Select an answer first
9application · medium
An administrator has forgotten the LCD PIN on the Left Control Panel of an MX7000 chassis. The chassis is in a secure data center, and the administrator has physical access to the front panel. What is the required procedure to regain access to the LCD menu?
Select an answer first
10foundation · easy
What happens when a Right Control Panel is replaced in an MX7000 chassis?
Select an answer first

Finished these 5 questions?

Review the revealed explanations, or continue through the curriculum.

Next 5 questions →Back to POWEREDGE-MX-MODULAR-DEPLOY

Free Basic Practice is a study aid with revealable answers — not a scored exam. Examers.io is independent and not affiliated with or endorsed by Dell Technologies. “POWEREDGE-MX-MODULAR-DEPLOY” is a trademark of its owner, used for identification only.